AMC 2026 catalogue

Welding

Water Soluble Tape, Purge Dams & Bladders

Find even MORE at Grainger.ca 1465

1-888-602-0000 WELDING

Aquasol® Tape Pressure sensitive water soluble tape is recommended to hold purge dams in position, and when needed to splice two or more pieces of Aquasol® paper together. Sold in rolls.

AQUASWT1

Size

Item

No. 1" x 300' Roll AQUASWT1 2" x 300' Roll AQUASWT2

AQUASOL

Liquifilm®

Liquifilm® is a water soluble transparent film used as a barrier during TIG welding. Liquifilm Kit includes film, two 250 mL bottles of Liquifilm adhesive, and knife. AQUAWSF1/20B

Description Size

Item

No. Liquifilm Adhesive 500 mL AQUAWS500 Liquifilm Brick 1 m x 20 m AQUAWSF1/20B Liquifilm Kit 1 m x 20 m AQUAWSF1/20RG

AQUASOL

EZ Purge® Pre-Formed Purge Dams The patented EZ Purge® is a pre-formed, self-adhesive water soluble purge dam that enables welders to save time on weld preparation, save gas and improve project timeliness. Eliminate measuring, cutting and constructing. Simply peel, insert and press the dam in place. Setup and installation time are completed in minutes. Custom sizes available for 40" to 84" as well as 1⁄2" to 1 1⁄2". AQUEZP10

Pipe Size (in.)

Item

No. Pkg. Qty. 2 AQUEZP2 192 3 AQUEZP3 192 4 AQUEZP4 48 5 AQUEZP5 48 6 AQUEZP6 48 8 AQUEZP8 48 10 AQUEZP10 48 12 AQUEZP12 48 14 AQUEZP14 24 16 AQUEZP16 24 18 AQUEZP18 24 20 AQUEZP20 24 22 AQUEZP22 24 24 AQUEZP24 24 30 AQUEZP30 24 36 AQUEZP36 24

AQUASOL EZ Zone® Tape EZ Zone® Tape is a purge gas retaining tape used to seal the root gap between pipes to trap argon gas. Composed of two adhesive sections separated by an adhesive-free center zone. 3 mil aluminum foil coated, high shear, high heat resistant, acrylic adhesive. EZ Tape® is fully coated with adhesive.

Description Width (in.) Length (ft.)

Item

No. EZ Zone® Tape 2.5 75 AQUEZ-ZT2.5 EZ Zone® Tape 4.0 75 AQUEZ-ZT4.0 EZ Tape® 2.0 75 AQUEZ-T2.0

AQUASOL

Inflatable Purge Bladders

▪Spark-resistant durable exterior cover ▪Heavy-duty interior inflatable bag Combine sizes to create a unique configuration. Reusable, economical and long term solution for pipe purging. Comprised of two inflatable lightweight polyurethane-coated nylon covered dams, connected by a braided tube. Ideal for purging multiple pipes of the same diameter and fabrication applications. Suitable for standard welding applications up to 392ºF or 200ºC.

AQUABLD16

AQUABLD14

Diameter Item No. 5" AQUABLD5 14" AQUABLD14 16" AQUABLD16 18" AQUABLD18 20" AQUABLD20 22" AQUABLD22 24" AQUABLD24

Diameter Item No. 26" AQUABLD26 28" AQUABLD28 30" AQUABLD30 32" AQUABLD32 34" AQUABLD34 36" AQUABLD36 38" AQUABLD38

I-PURGE

I-Purge® Modular Inflatable Purge Bladders The patented I-Purge® is a CE approved and modular system for pipe purging. Equipped with quick connect fittings for rapid assembly and replacement. Kink free, extended length harnesses available to accommodate pre-heating and high heat applications. Available in sizes from 2" to 52".

AQUABLD2

Size (in.)

Item

No. 2 AQUABLD2 3 AQUABLD3 4 AQUABLD4 6 AQUABLD6

Size (in.)

Item

No. 8 AQUABLD8 10 AQUABLD10 12 AQUABLD12

I-PURGE