AMC 2026 catalogue

Hardware

Slides, Handles and Hinges

Find even MORE at Grainger.ca 1189

1-888-602-0000 HARDWARE

WWG4WRY4

WWG4KRP8

Steel Drawer Slides, Side Mount

Precision ball bearings and raceways ensure smooth drawer operation. Slides have a positive stop so drawer will not disengage from the slide, and a hold-in detent firmly holds the drawer in a closed position. Load rating based on 50,000 cycles. Mounting screws included.

Closed Length Travel Length

Side Mount Load

Cap. per Pair Finish

Item

No. 8" 8 in 75 lbs. Zinc Plated WWG4KRP8 14" 14 in 267 lbs. Zinc WWG4KRU5 17 47⁄64" 18 in 100 lbs. Zinc WWG4KRV8 18" 18 in 253 lbs. Zinc WWG4KRU7 20" 20 in 244 lbs. Zinc WWG4KRU8 28" 28 in 182 lbs. Zinc WWG4KRV3

ACCURIDE

GGH1WDG3 GGH1WDD4

GGH1WDD1

Braces and Reinforcement Hardware

Length (in.) Width (in.) Holes per Leaf Finish

Item

No. Pkg. Qty. Chair/ Corner Braces

1 3⁄4 1 Zinc GGH1WDL9 4 Corner Brace

3⁄4 1⁄2 1 Zinc GGH1WDD4 1

1 1⁄2 1 Galvanized GGH1WDD9 2 1⁄2 1 Zinc Plated GGH4PB60 1 1 1⁄2 1⁄2 2 Zinc Plated GGH4PB61 1 2 5⁄8 2 Zinc Plated GGH4PB62 1

2 1⁄2 5⁄8 2 Zinc GGH1WDD5 1 3⁄4 3 Zinc GGH1WDJ5 4 3 3⁄4 2 Zinc Plated GGH4PB63 1

3 1⁄2 3⁄4 2 Zinc GGH1WDD6 1 3⁄4 3 Zinc GGH1WDJ6 4 4 7⁄8 2 Zinc Plated GGH4PB64 1

5 1 3 Galvanized GGH1WDE6 1 1 3 Zinc Plated GGH4PB65 1

6 1 1⁄8 3 Galvanized GGH1WDE7 1 1 1⁄8 3 Zinc GGH1WDD7 1 8 1 3⁄32 3 Zinc GGH4PB66 1 10 1 1⁄4 4 Zinc GGH1WDD8 1 Double Wide Corner Brace

1 1⁄2 1 1⁄2 3 Zinc GGH1WDF1 1 Flat Corner Brace

2 1 1⁄2 3 Zinc GGH4PE75 1 3⁄8 2 Zinc Plated GGH4PE72 1 2 1⁄2 1 1⁄2 3 Zinc GGH4PE76 1 Flat Corner irons

3 1⁄2 5⁄8 2 Zinc GGH1WDK7 1 Heavy Duty Corner Brace

2 2 2 Zinc GGH1WDD1 1 3 3 2 Zinc GGH1WDD2 1 4 4 2 Zinc GGH1WDD3 1 Mending Plate

3 3⁄4 4 Zinc GGH1WDG3 1 4 7⁄8 4 Zinc GGH4PB68 1 T-Plate

3 3 3 on Top, 2 on Stem Zinc GGH1WDK4 1

APPROVED VENDOR

GGH4PPP5

Narrow-Profile Weld- On Lift-Off Hinges

Suitable for tight spaces, and can be welded in place horizontally or vertically. Hinges can be mounted flush, offset, or straight. Pin is permanently attached to the frame leaf. Reversible for left- or right-handed applications.

Height Width Pin Dia. Pin Material

Item

No. 304 Stainless Steel 3 5⁄32" 5⁄8" 5⁄16" Stainless Steel GGH4PPR6 3 15⁄16" 3⁄4" 3⁄8" Stainless Steel GGH4PPR7 5 29⁄32" 1" 1⁄2" Stainless Steel GGH4PPR9 Aluminum

3 15⁄16" 3⁄4" 3⁄8" Stainless Steel GGH4PPT6 5 29⁄32" 1" 1⁄2" Stainless Steel GGH4PPT8 Steel

2 3⁄4" 1⁄2" 1⁄4" Steel GGH4PPP5 3 5⁄32" 5⁄8" 5⁄16" Steel GGH4PPP6 3 13⁄32" 5⁄8" 5⁄16" Brass with Grease Fitting GGH4PPU2 3 15⁄16" 3⁄4" 3⁄8" Steel GGH4PPP7 4 3⁄16" 3⁄4" 3⁄8" Brass with Grease Fitting GGH4PPU3 4 3⁄4" 3⁄4" 3⁄8" Steel GGH4PPP8 5" 3⁄4" 3⁄8" Brass with Grease Fitting GGH4PPU4 5 1⁄3" 29⁄32" 1⁄2" Steel GGH4PPP9 5 29⁄32" 1" 1⁄2" Steel GGH4PPR1 6 5⁄32" 1" 1⁄2" Brass with Grease Fitting GGH4PPU5 7 3⁄32" 1" 1⁄2" Steel GGH4PPR2 7 1⁄3" 1" 1⁄2" Brass with Grease Fitting GGH4PPU6 7 7⁄8" 1 1⁄8" 5⁄8" Steel GGH4PPR3 8 1⁄8" 1 1⁄8" 5⁄8" Brass with Grease Fitting GGH4PPU7

MARLBORO

All Fit Nylon Bushing

▪Thickness tolerance: ±0.15 ▪Temp. range: -40° to 250°F Multiple locks snap into panels from 1⁄32" to 1⁄8" thick, without tools.

Hole Dia. Inside Dia. Outside Dia. Outside Dia.

Item

No. Pkg. Qty. 0.875" 0.562" 0.937" 0.937" WWG1EMN6 25

APPROVED VENDOR

Unthreaded Pull Handles

GGH1VZZ9

Mounting Hole Center

to Center

Vert. Mounting

Hole Ctr.

to Ctr. Projection

Grip Dia. Screw Size Brand

Item

No. 3 15⁄32" — 63⁄64" 25⁄64 in #20 x 3 4⁄5" Sugatsune WWG4WRK9 4 1⁄64" — 1 17⁄64" 3⁄4 in 3.5 x 20 Sugatsune WWG4WRY4 4 1⁄8" 11⁄16 in 1 1⁄4" 1⁄2" #7 x 3⁄4" Approved Vendor GGH4PE15 4 11⁄64" — 1 5⁄32" 1⁄2" #6 x 3⁄4" Approved Vendor GGS4PE14 4 11⁄64" — 1 5⁄32" 1⁄2" #6 x 3⁄4 FH Approved Vendor GGH1VZZ9 4 3⁄4" 1 in 1 13⁄32" 3⁄4 in #8 x 5⁄8 FH Approved Vendor GGH4PE18 4 7⁄8" 7⁄8 in 1 13⁄32" 3⁄4 in #8 x 5⁄8" Approved Vendor GGH4PE17 4 7⁄8" 7⁄8 in 1 3⁄8" — #8x5/8"FH Approved Vendor GGH1WAC4 5 1⁄2" 1 in 1 13⁄32" 3⁄4 in #9 x 3⁄4" Approved Vendor GGH4PE19 5 1⁄2" 1 in 1 13⁄32" 3⁄4 in #6 x 3⁄4 FH Approved Vendor GGH4PE20 5 1⁄2" 15⁄16 in 1 17⁄32" 3⁄4 in #9 x 3⁄4" Monroe Pmp WWG4LAC6 6 3⁄10" — 2 1⁄16" 1 1⁄8 in #12 x 1 1⁄2 FH Approved Vendor GGH4PE24 6 1⁄2" 1 3⁄8 in 2 1⁄8" 1" #12 x 1 1⁄4" Approved Vendor GGH4PE21 6 1⁄2" 1 3⁄8 in 2 1⁄2" — #12x1-1/2"FH Approved Vendor GGH1WAE9 6 1⁄2" 1 3⁄8 in 2 1⁄8" 1" #12 x 1 1⁄4 FH Approved Vendor GGH4PE22 7" 1 in 1 25⁄32" 5⁄8 in 1⁄4" Monroe Pmp WWG4LAE8 14" — 2 5⁄8" 5⁄8 in 5⁄16" Monroe Pmp WWG4KZY9

APPROVED VENDOR, MONROE PMP, SUGATSUNE