AMC 2026 catalogue

Raw Materials

Shim Stock and Aluminum

Find even MORE at Grainger.ca 1195

1-888-602-0000 RAW MATERIALS

Aluminum Information Soft, lightweight, corrosion-resistant alloy conducts both heat and electricity.

ALUMINUM TEMPERS

H14 (1⁄2 Hard) Material is strain-hardened only (without additional thermal treatment) to a half-hard temper.

H22 (1⁄4 Hard) Material is strain-hardened and partially annealed to a quarter-hard condition.

H32 (1⁄4 Hard) Material is strain-hardened and mechanical properties are stabilized with supplementary thermal treatment to a quarter-hard temper.

T52 Material resists corrosion and can be formed, machined, and welded. Aluminum rods are lightweight and suitable for braces, cross members, frames, ornamental work, railings, and supports. Rods can be drilled, machined, punched, and sawed.

T6 Material is solution heat treated and then artificially aged.

T651 Material is solution heat treated, artificially aged, and then stretch-stress relieved. Refers to plates and cold-finished bars and rods.

T6511 Extruded material is solution heat treated, artificially aged, and then stretch-stress relieved.

* Typical levels @ 1" dia.

Tensile Yield Strength* Strength* Hardness* Corrosion Wear Material (psi) (psi) (BHN) Resistance Resistance Formability Machinability Weldability Alloy 2011 55,000 43,000 95 Poor Fair Fair Excellent Not Recommended Alloy 2024 65,000 to 68,000 47,000 120 Poor Good Fair Good Fair Alloy 3003 22,000 to 23,000 20,000 to 21,000 40 Excellent Not Recommended Good Poor Good Alloy 5052 33,000 28,000 60 Excellent Not Recommended Good Poor Good Alloy 6061 45,000 40,000 95 Good Fair Fair Fair Good Alloy 6063 27,000 21,000 60 Good Not Recommended Good Good Good Alloy 7075 73,000 to 83,000 63,000 to 73,000 150 Fair Good Poor Good Not Recommended

Shim Stock—Rolls

Note: Additional sizes are available.

Roll Shim Width Shim Length

Shim Thickness

Thickness Tolerance Shim Material

Item

No. 110 6 in 100 in 0.0020" ±0.0003 in Copper WWG5HA13 260 6 in 100 in 0.0015" ±10% Brass GUS3L487 6 in 180 in 0.0200" ±0.001 in Brass WWG5EY89 12 in 120 in 0.0010" ±10% Brass WWG5EY66 12 in 120 in 0.0030" ±10% Brass WWG5EY68 150 mm 2 1⁄2 m 0.0197" ±0.045 mm Brass PRE17978 150 mm 2 1⁄2 m 0.0079" ±0.019 mm Brass WWG5FA30 302 6 in 50 in 0.0310" ±0.001 in Stainless Steel GUS3L703 12 in 50 in 0.0030" ±10% Stainless Steel WWG5FA39 12 in 50 in 0.0080" ±10% Stainless Steel WWG5FA44 12 in 50 in 0.0120" ±0.002 in Stainless Steel WWG5FA46

PRECISION BRAND

Shim Width Shim Length

Shim Thickness

Thickness Tolerance Shim Material

Item

No. 1008-1010 6 in 100 in 0.0220" ±0.001 in Steel GUS3L474 6 in 100 in 0.0180" ±0.001 in Steel GUS3L469 12 in 120 in 0.0100" ±0.00075 in Steel PRE16460 1095 3 in 50 in 0.0020" ±0.001 in Steel GUS3L707 3 in 50 in 0.0030" ±0.001 in Steel GUS3L709 5 in 50 in 0.0040" ±0.001 in Steel GUS3L711 6 in 50 in 0.0050" ±0.00075 in Steel GUS3L713 6 in 50 in 0.0070" ±0.00075 in Steel GUS3L717

Aluminum—90° Angles

▪6061 standards: ASTM B308, AMS-QQ-A-200

GUS2EYN4

APPROVED VENDOR

Leg Length

Leg Length

Tolerance

Thickness Tolerance

4 ft. 8 ft. Item

No.

Item

No. 1⁄8" 3⁄4 in ±0.01 in ±0.007" — GUS2EYN8 1 1⁄4 in ±0.012 in ±0.007" WWG2EYN2 GUS2EYP3 1 1⁄2 in ±0.014 in ±0.007" GUS2EYN4 GUS2EYP5 1 in ±0.012 in ±0.007" — GUS2EYP1 2 in ±0.024 in ±0.007" GUS2EYN6 GUS2EYP7 3⁄16" 1 in ±0.012 in ±0.007" GUS2EYP9 GUS2EYR8 1 1⁄2 in ±0.014 in ±0.007" GUS2EYR4 GUS2EYT3 1 1⁄4 in ±0.012 in ±0.007" WWG2EYR2 — 2 in ±0.024 in ±0.007" GUS2EYR6 — 2 in ±1 in ±0.007" — GUS2EYT5 1⁄4" 1 1⁄4 in ±0.012 in ±0.008" GUS2EYT9 GUS2EYV7 1 1⁄2 in ±0.014 in ±0.008" GUS2EYU2 GUS2EYV9 1 in ±0.012 in ±0.008" — GUS2EYV5 1 3⁄4 in ±0.014 in ±0.008" — GUS2EYW2 2 1⁄2 in ±0.024 in ±0.008" GUS2EYU8 GUS2EYW6 2 in ±0.024 in ±0.008" — GUS2EYW4 3 in ±0.024 in ±0.008" GUS2EYV1 GUS2EYW8

Leg Length

Leg Length

Tolerance

Thickness Tolerance

4 ft. 8 ft. Item

No.

Item

No. 4 in ±0.034 in ±0.008" — GUS2EYX1 3⁄8" 2 in ±0.024 in ±0.008" GUS2EYX3 — 2 1⁄2 in ±0.024 in ±0.008" GUS2EYX5 — 3 in ±0.024 in ±0.008" GUS2EYX7 — 6 in ±0.044 in ±0.008" GUS2EYY2 — 1⁄2" 4 in ±0.034 in ±0.009" GUS2EYY6 — 5 in ±0.034 in ±0.009" GUS2EYY8 GUS2EYZ5