AMC 2026 catalogue

Hydraulics

Spreaders, Maintenance Kits and Pullers

Find even MORE at Grainger.ca 1543

1-888-602-0000 HYDRAULICS

Hydraulic Spreaders Spreaders - For spreading pipe flanges in pipeline applications and as a general purpose industrial spreader. Requires an access gap of less than 1⁄4". Stepped design allows each step to be spread under full load. Includes safety block for manual hold-open. Wedge - Helps minimize access gaps on applications with limited insertion space while lifting heavy loads. Securely raises or lowers with no slippage. Single-acting spring return cylinder allows for automatic and mechanical retraction. Includes safety block. Flange Spreader - Single-acting pin-type spreader can be used to maintain pipeline flanges in petrochemical, oil-and-gas, pulp-and-paper, and power generation/utility applications.

Item Capacity (tons) Oil Capacity (Cu.-In.) Tip Clearance (in.) Spread Width (in.)

Item

No.

Hydraulic Ram Spreader

3⁄4 3.91 1.26 11.50 ENPWR15 1 0.61 0.38 3.70 ENPWR5 Hydraulic Lift Wedge Ram 16 4.75 0.39 2.02 ENPLW16 Hydraulic Flange Ram Spreader 14 4.75 0.24 3.16 ENPFSH14

ENERPAC

Heavy-Duty Hydraulic Maintenance Sets

Note: When cylinders are used with maintenance set attachments, the maximum system pressure must be limited to half the rated pressure (5000 psi). Capacity of cylinders limited to half of rated capacity.

ENPMS2-4

Tonnage Capacity

Capacity with

Attachments Includes

Item

No.

5 Ton 2.5 Ton Mfr. No. WR-5, RC-55, P-142, MZ4009, MZ4006, MZ4005, MZ4004, MZ4003, MZ4002, MZ4007, MZ4013,

HC7206, GA-3, G2535L, A629, A545, A539, A532, A531, A530, A25, A23, A1034 ENPMSFP5

2.5 Ton Mfr. No. P-142 Hand Pump, HC7206 Hose, RC-55 Cylinder, GP-10S Gauge, GA-4 Gauge Adapter, 34 Attachment Components and Wood Case ENPMS2-4 5 - 12.5 Ton 12.5 ton Mfr. No. P-392 Hand Pump, HC7206 Hose, GP-10S Gauge, GA-2 Gauge Adapter, RC-102, RC-106 and RC-256 Cylinders ENPMS2-1020

10 Ton 5 Ton Mfr. No. P-392 Hand Pump, HC7206 Hose, RC-106 Cylinder, GP-10S Gauge, GA-2 Gauge Adapter, 35 Attachment Components and Wood Case ENPMS2-10

5 Ton Mfr. No. WR-5, RC-106, P-392, MZ1052, MZ1005, MZ1004, MZ1003, MZ1002, MZ1050,

HC7206, GA-3, A6, A21, A20, A18, A15, A14, A13, A129, A128, A10, A16 ENPMSFP10

25 Ton 12.5 ton Mfr. No. P-392 Hand Pump, HC7206 Hose, RC-256 Cylinder, GP-10S Gauge, GA-2 Gauge Adapter, 13 Attachment Components and Wood Case ENPMS2-20

ENERPAC

Heavy-Duty Hydraulic Pullers

▪Max. pressure: 10,000 psi Speed crank and mechanical adjusting screw allow fast contact to work before hydraulics are applied. Made of forged steel components. Come complete with composite hand pump, single-acting hollow cylinder, 6-ft. hose, gauge, gauge adapter, and 4 puller styles (grip, cross bearing, bearing cup, and bearing puller). Pump and hollow ram provide precise hydraulic control and help ensure safe, efficient pulling. No. ENPBHP1752 includes metal case. Nos. ENPBHP2751G and ENPBHP3751G include saddle and wood case.

ENPBHP2751G

No. of Pieces Tonnage Capacity Stroke Length No. of Jaws

Item

No. For Pushing or Pulling

10 8 Ton 1 5⁄8" 3 ENPBHP1752

11 20 Ton 2" 3 ENPBHP2751G 30 Ton 2 1⁄2" 3 ENPBHP3751G

ENERPAC

ENPLW16

ENPWR15