AMC 2026 catalogue

Machining

Durometers and Pin Vises

Need a price? Log in or register at Grainger.ca 1338

MACHINING

Surface Gages No. STA257D has 12" and 18" spindle lengths and 4 gage pins. No. STA57A features 9" spindle length and 2 gage pins. Both gages include scriber.

STA257D STA57A

STARRETT

Base Size (in.)

Upright

Post Dia. (in.) Snug

Item

No. 3 1⁄2 x 3 3⁄16 0.375 3⁄8 in STA257D 3 x 2 9⁄16 0.312 5⁄16 in STA57A

Durometers

▪Blunt-taper indenter models

have 35° tip angle ▪Sharp-point indenter models

have 30° tip angle All Durometers are analog except No. MTT811-336-10 is digital. Provide quick and accurate results when testing elasticity of natural rubber, neoprene, polyesters, PVC, leather, nitrile, wax, vinyl, cellulose acetates, polystyrol (polystyrene), and other materials. Shore A scale is for flexible materials, and Shore D scale is for hard materials. Include case. MTT811-337-10

MTT811-336-10

Scale Range Location Area (in.)

Item

No. Blunt Taper

Shore A 10 to 90 HA 1 47⁄64 x 23⁄32 MTT811-335-10 Shore A 10 to 90 HA 1.73 in x 0.71 in MTT811-336-10 Shore A 10 to 90 HA 0.71 in dia MTT811-331-10 Sharp Point

Shore D 20 to 90 HA 0.71 in dia MTT811-333-10 Shore D 20 to 90 HA 1.73 in x 0.71 in MTT811-337-10

MITUTOYO

Surface Plate Stand

▪Preassembled

Plate Length Plate Width

Item

No. 24 in 36" STA82228

STARRETT

Crystal Pink Granite Surface Plates Calibration is NIST certified. Meet U.S. MIL-I-45208A and Federal Spec. ASME B89.3.7 for flatness. Grade A Inspection plates are for general quality control work. Grade B Toolroom plates are for production checking work throughout a shop.

Note: More sizes are available, go to Grainger.ca.

STA80616

Surface Size (in.)

Flatness Unilateral

Tolerance (in.) Thickness (in.) Weight (lbs.)

Item

No. A

12 in x 18 in 0.000100 4 85 lb STA80613 24 in x 24 in 0.000150 6 330 lb STA80649 36 in x 36 in 0.0003 6 745 lb STA80704 36 in x 48 in 0.000400 8 1,320 lb STA80713 36 in x 60 in 0.000500 10 2,065 lb STA80722 B

12 in x 12 in 0.000200 4 83 lb STA80616 36 in x 36 in 0.0006 6 745 lb STA80707 36 in x 48 in 0.000800 6 990 lb STA80716 36 in x 60 in 0.001000 8 1,650 lb STA80725 36 in x 72 in 0.0012 8 1,980 lb STA80734

STARRETT

Pin Vises Securely hold small stock, taps, drills, reamers, scribers, wire, small files, etc. Knurled handle end allows for fast opening and closing, while octagonal shape helps prevent rolling. Full-length holes allow vise to accommodate any wire length.

STA240A STA165

STAS240Z STA162A

Range (mm) Handle

Item

No. Pin Vise

0.25 mm to 5.1 mm Round, Knurled Steel STAS240Z 0 mm to 1 mm Round, Knurled Steel STA162A 0.80 mm to 1.6 mm Round, Knurled Steel STA162B 1.30 mm to 3.2 mm Round, Knurled Steel STA162C 2.90 mm to 4.8 mm Round, Knurled Steel STA162D 0 mm to 3.2 mm Round, Knurled Steel STA165 0 mm to 1 mm Octagon PVC STA166A 0.80 mm to 1.6 mm Octagon PVC STA166B 1.30 mm to 3.2 mm Octagon PVC STA166C 2.90 mm to 4.8 mm Octagon PVC STA166D 0.25 mm to 1.4 mm Round, Knurled Steel STA240A 0.64 mm to 1.9 mm Round, Knurled Steel STA240B 1.20 mm to 3.4 mm Round, Knurled Steel STA240C 2.80 mm to 5.1 mm Round, Knurled Steel STA240D Pin Vise Set

0.80 mm to 4.8 mm Octagon PVC STAS166Z

STARRETT

End Mill Kits For Starter Kit contents, see Grainger.ca

Includes Capacity

Item

No. (10) 2-Flute Single-End General Purpose Centercutting End Mills, (10) 4-Flute Single-End

General Purpose Centercutting End Mills, Case

3⁄16 in to 3⁄4 in WWG16N204

DAYTON