AMC 2026 catalogue

HVAC & Refrigeration

Exhaust Fans and Fan/Smoke Ejectors

Find even MORE at Grainger.ca 1849

1-888-602-0000 HVAC & REFRIGERATION

Portable Utility Fan/Smoke Ejector Accessories Collar adapters are required when using flexible hoses with portable utility fans. Easily attached to inlet or discharge of portable utility fans with spring clips. Flexible hoses are constructed from a PVC fabric sewn around a spring wire helix. Hose temperature range is -20° F to 200° F, flame resistant material. Compressible to 1⁄5 of extended length complete with soft cuff and fastening strap.

LDRCA16

Diameter (in.) Length (ft.) Radiator Connection

Item

No. Collar Adapters

16 — U16 LDRCA16 18 — U18 LDRCA18 Flexible Hoses

16 20 U16 LDRH16BC 18 20 U18 LDRH18BC

LFI

Agricultural Exhaust Fans

▪Totally enclosed air-over motors with sealed ball bearings ▪Heavy-gauge galvanized frame to withstand

corrosive farm duty applications ▪Motor not included All models have galvanized steel venturi panels and propellers, and 1" x 2" galvanized mesh intake and discharge guards. For humid, corrosive, nonexplosive, and nonhazardous environments such as livestock and poultry houses. Nos. DTN44YU10 and DTN44YU20 shipped without motor, but include drive sheaves, belt and motor plate; assembly required. Recommended motors: for No. DTN44YU10 use No. GGE4WNZ5; for No. DTN44YU20 use No. AOSPD6104AV2; both sold separately on Grainger.ca.

Note: OSHA complying guards are required when fan is installed within 8 ft. of floor or working level, or within reach of personnel. Review OSHA Codes and UL Standards. DTN44YU10

* CFM ratings are based on units tested with 3⁄4 HP motor and fan speed of 719 rpm. ** CFM ratings are based on units tested with 1 HP motor and fan speed of 608 rpm.

Propeller Dia. (in.)

No. of Blades

CFM @ 0.000" SP CFM @ 0.050" SP CFM @ 0.100" SP CFM @ 0.150" SP

CFM/ Watt @ 0.000" SP

CFM/ Watt @ 0.050" SP

CFM/ Watt @ 0.100" SP

CFM/ Watt @ 0.150" SP HP

Motor

RPM Fan RPM

A (in.)

B (in.)

Opening Required

H (in.)

Opening Required

W (in.)

Item

No. 36 4 11,598 10,757 10,052 9277 19.3 17 15.3 13.7 3⁄4 1725 719 40 1⁄8 14 41 41 DTN44YU10 * 48 3 19608 18228 16773 15347 21.6 19.5 17.3 15.4 1 1725 608 52 1⁄8 17 52 7⁄8 52 7⁄8 DTN44YU20 **

DAYTON

Hazardous Location Direct-Drive Exhaust Fans Vertical-mount fans require little maintenance and are easy to install. All models feature a totally enclosed, ball bearing motor with thermal overload protection. The fan blades are constructed of well-balanced, heavy-gauge aluminum. Designed with a rugged steel welded box housing that has a durable, powder- coated finish. The aluminum louver shutters are supported by long life nylon bushings. Heavy wire chrome-plated OSHA guards provide protection on intake side of fan. All fans are shipped assembled.

LDRSD12XPF

Blade Dia.

CFM @ 0.000" SP CFM @ 0.250" SP Fan Voltage Phase

Exhaust/Supply

Fan Motor HP Motor RPM Full Load Amps

Sones @ 0.000"

SP @ 5 ft. No. of Blades Brand

Item

No. 8 in 320 cfm —

115/208- 230V AC 1 1⁄3 hp 1,725 RPM 6.6/3.3

3

Canarm LDRSD08XPF 10 in 620 cfm — — Canarm LDRSD10XPF 12 in 1,640 cfm 1390 — Lfi LDRSD12XPF 18 in 3,200 cfm 2920 23 Lfi LDRSD18XPF 24 in 5,500 cfm 5100 19 Lfi LDRSD24XPF

CANARM, LFI