AMC 2026 catalogue

Adhesives, Sealants & Tape

Retaining Compounds, Activators and Primers

Need a price? Log in or register at Grainger.ca 1250

ADHESIVES, SEALANTS & TAPE

DVC15250

Casting Urethanes Flexane® 80 Liquid Medium-viscosity (10,000 cPs) urethane fills voids completely, faithfully reproduces mold detail, and cures to semi-rigid rubber. Mixes and pours easily.

▪Returns to its original shape after 650% elongation ▪10-hour demolding time

Description Item No. Flexane® 80 Liquid, 1 lb. DVC15800 Flexane® 80 Liquid, 10 lbs. DVC15810

Description Item No. Flexane® 94 Liquid, 1 lb. DVC15250 Flexane® 94 Liquid, 10 lbs. DVC15260

DEVCON

Flexane® 94 Liquid Low-viscosity (6,000 cPs) urethane cures to rigid rubber (Shore A 97).

▪Harder material than Flexane® 80 Liquid For applications requiring a shorter demolding time (5 hours)

Primers, Activators & Accelerators Anaerobic adhesives cure in the absence of air and in the presence of metal ions. When assembling inactive metal parts, which are low in metal ions, primers are recommended to ensure proper adhesion. Use with anaerobic threadlockers, retaining compounds, pipe seal- ants, and gasketing materials. Primer Is Recommended for Inactive Metals such as Aluminum - Anodized (Alodine®, Irridite®) and Pure, Black Oxide - Natural or Chemical, Cadmium, Gold, Iconel®, Magnesium, Plated Parts, Silver, Stainless Steel, Steel - Galvanized and Magnetite, Titanium, and Zinc. Primer Is Optional for Active Metals such as Brass, Bronze, Copper, Iron, Kovar®, Manganese, Monel®, Nickel, and Plain Steel. LCT110330R LCT1069258 LCT135285R LCT209714R

Item Cured Color Container Size Container Type Primary Applications Base Viscosity

Item

No. Primer Teal 0.59 fl oz Stick Speeds Cure, Surface Preparation Monomer Semisolid LCT1069258

Primer and Activator Green 1.75 fl oz Bottle Speeds Cure Acetone, Isopropanol 2 cP LCT135285R Green 4.5 fl oz Aerosol Can Speeds Cure Acetone 2 cP LCT209715R

Activator Yellow 4.5 fl oz Aerosol Can Speeds Cure Heptane, Isopropanol 1.5 cP LCT209714R Yellow 4.5 oz Aerosol Can Speeds Cure Acetone-Based, Isopropanol-Based 2 cP LCT135337R

LOCTITE

Retaining Compounds Retaining compounds fill the space between parts to hold them in place with a high- strength bond. They harden in the absence of air (called anaerobic adhesives). Full cure in 24 hr.

Low-Viscosity - Bond rigid metal assemblies. Fixture in 10 min. Agency approvals: CFIA, MIL-R-46082B for existing designs, ASTMD-5363 for new designs.

High-Temperature - High-viscosity for repairing valve sleeves, retaining valve seats, and affixing cylindrical liners. Fixture in 30 min. CFIA listed.

High-Strength Nos. LCT1835205 and LCT1835196 - Room temp.-curing adhes- ives are for pulleys, cams, flywheels, and rotor-to-shaft bonds. Fixture in 10 min. NSF/ ANSI-61 certified, ABS approved, and CFIA listed.

LCT135511R LCT1835196

Shear Strength Retaining Compounds Properties

Minimum Operating Temperature

Maximum Operating Temperature Container Size

Item

No. 603 3,770 psi For Close Fitting Parts, High Strength, Oil Tolerant -65°F 300°F 1.7 fl oz LCT231099R 609 2,290 psi For Close Fitting Parts -65°F 300°F 0.3 fl oz LCT135511R 2,290 psi For Close Fitting Parts -65°F 300°F 1.7 fl oz LCT135512R 2,290 psi For Close Fitting Parts -65°F 300°F 8.5 fl oz LCT135513R 620 3,500 psi High Temperature-Resistant -65°F 450°F 0.3 fl oz LCT234772R 3,500 psi High Temperature-Resistant -65°F 450°F 1.7 fl oz LCT135514R 3,500 psi High Temperature-Resistant -65°F 450°F 8.5 fl oz LCT135515R 640 2,175 psi Extended Working Time -65°F 350°F 1.7 fl oz LCT135520R 648 3,900 psi For Close Fitting Parts -65°F 355°F 1.7 fl oz LCT1835920 660 2,490 psi For Loose Fitting Parts -65°F 300°F 0.2 fl oz LCT209765R 680 4,030 psi For Loose Fitting Parts, High Strength -65°F 355°F 0.3 fl oz LCT1835205 4,030 psi For Loose Fitting Parts, High Strength -65°F 355°F 8.5 fl oz LCT1835196

LOCTITE