AMC 2026 catalogue

Material Handling

Dock Bumpers & Accessories

Find even MORE at Grainger.ca 617

1-888-602-0000 MATERIAL HANDLING

Trailer/Crane Bumpers

▪Priced and sold in sets of 2 Mount directly onto truck trailers and cranes to protect them from contact with docks, buildings, or other trail- ers and cranes. Mounting hardware not included. No. GGM2MYR7 includes steel washers molded in bottom of access holes.

GGM2MYR6

Overall

Width

Overall

Height

Overall

Depth Mounting Hole Dia.

Mounting Holes O.C. W

Item

No. 3 1⁄2 in 6 in 3 1⁄2 in 1 1⁄4" 3" GGM2MYR6 3 5⁄8 in 4 in 3 5⁄8 in 1 1⁄4" 3 1⁄2" GGM2MYR7

APPROVED VENDOR

Clearance Bars Include eye bolts and lettering kit.

POSHTGRD480YR

Overall Length Outside Dia. Material

Item

No. 80 in 5" HDPE POSHTGRD480YR 80 in 7 3⁄8" HDPE POSHRGRD780YR

POST GUARD

Mechanical Edge-O-Dock Leveler

▪Mechanical spring

counter balance ▪Includes: dock leveler,

bumper, and handle ▪Open depth: 27" ▪Closed depth: 15" ▪Load capacity: 20,000 lb. ▪For docks at least 48"H Permanently attach to dock face. Provide service range of 5" up, 5" down. No concrete recess required.

VESFM2066

Dock Leveler Lift Mechanism Usable Width Overall Width

Item

No.

Mechanical Spring Counterbalance 66 in 93 in VESFM2066 72 in 99 in VESFM2072

VESTIL

Dock Bumpers Weather- and abrasion-resistant; protect docks, dock level- ers, and shelters from impact damage. Individual sections can be replaced if damaged. Installation Kits Nos. 36F680 and 36F681 are sold separately.

LAMINATED DOCK BUMPERS Prevent impact damage at loading dock. Constructed from same material used in heavy-duty tire cord. Weld to channel or to curb angle with 1 preset bolt. Mount with anchor bolts in new concrete construction or with lag bolts and shields for existing concrete. Wood dock mount requires lagging. Flush-mounted.

D-SHAPE Compress on contact, reducing impact force between build- ing and vehicle. Mounting holes on the back of the bumper protect vehicle's finish. 1-piece construction reduces gaps between bumpers.

L- AND T-SHAPE T-Shape No. GGM2MYR8 includes a reflector.

RECTANGULAR Include a thick molded-in steel bar running the length of each bumper; anchor the rubber to the dock. Mounting fasteners not included.

BUMPER STOP Draws attention to high-traffic areas. Features a neon yellow caution stripe down its center, recessed to protect it from impact damage.

ADDITIONAL BUMPER INSTALLATION KIT Includes 4 concrete anchor bolts (3⁄4" x 4"L). Does not include masonry drill bit.

GGM2MYR1 VES1012-4.5

Item Includes Brand

Item

No. Additional Bumper Installation Kit (4) Anchor Bolts Approved Vendor GGM33F681

Overall Width

Overall

Height

Overall

Depth

Mounting Holes O.C. W

Mounting Hole Dia. Brand

Item

No. Laminated Rubber Rectangular

12 3⁄4 in 24 in 4 1⁄2 in 11" 7⁄8" Approved Vendor GGM22NT90 36 in 4 1⁄2 in 11" 7⁄8" Approved Vendor GGM22NT91 13 3⁄4 in 12 in 4 1⁄2 in 12" 7⁄8" Approved Vendor GGM22NT86 14 1⁄2 in 10 in 4 1⁄2 in 12" 13⁄16" Vestil VES1012-4.5 15 3⁄4 in 10 in 4 1⁄2 in 14" 13⁄16" Approved Vendor GGM5W823

19 3⁄4 in

10 in 4 1⁄2 in 18" 13⁄16" Approved Vendor GGM5W824 10 in 4 1⁄2 in 18" 7⁄8" Approved Vendor GGM22NT83 10 in 6 in 18" 13⁄16" Approved Vendor GGM4W942 12 in 4 1⁄2 in 18" 7⁄8" Approved Vendor GGM22NT87 20 in 10 in 4 1⁄2 in 18" 13⁄16" Vestil VES1018-4.5 20 1⁄4 in 10 in 6 in 18" 13⁄16" Vestil VES1018-6

25 3⁄4 in 10 in 4 1⁄2 in 24" 13⁄16" Approved Vendor GGM5W825 10 in 4 1⁄2 in 24" 7⁄8" Approved Vendor GGM22NT84 12 in 4 1⁄2 in 24" 7⁄8" Approved Vendor GGM22NT88 26 in 10 in 4 1⁄2 in 24" 13⁄16" Vestil VES1024-4.5

37 3⁄4 in 6 in 4 1⁄2 in 36" 13⁄16" Approved Vendor GGM5W826 10 in 4 1⁄2 in 36" 7⁄8" Approved Vendor GGM22NT85 12 in 4 1⁄2 in 36" 13⁄16" Approved Vendor GGM5W827 Rubber L-Shape

18 in 18 in 4 in 10 1⁄4" 3 3⁄4" Approved Vendor GGM2MYR3 Rectangular

2 in 2 1⁄2 in 8 in 4" 1⁄2" Approved Vendor GGM22NT80 3 1⁄2 in 6 in 3 1⁄2 in 3 1⁄8" 1⁄2" Approved Vendor GGM22NT82

4 1⁄2 in 10 in 2 3⁄4 in 5" 1 1⁄2" Approved Vendor GGM2MYP8 30 in 3 in 5" 1 1⁄2" Approved Vendor GGM2MYP9 5 1⁄2 in 8 in 3 1⁄2 in 5 1⁄2" 19⁄32" Approved Vendor GGM22NT81 16 in 2 in 2 in 6 5⁄8" 1⁄2" Approved Vendor GGM22NT79 17 1⁄2 in 8 in 2 in 8" 2" Approved Vendor GGM2MYR2 24 in 12 in 3 in 6" 7⁄8" Approved Vendor GGM2MYR9 Rectangular Bumper Stop

5 1⁄8 in 18 in 1 3⁄8 in 3" 1 1⁄8" Approved Vendor GGM2MYR5 Solid Black Rectangular

12 in 13 in 4 in 7" 7⁄8" Approved Vendor GGM2MYR1 T-Shape

22 in 22 in 3 in 3" 7⁄8" Approved Vendor GGM2MYR8 Steel Face, Laminated Rubber Backing Rectangular

12 3⁄4 in 20 in 5 1⁄4 in 11" 7⁄8" Approved Vendor GGM22NT72 24 in 5 1⁄4 in 11" 7⁄8" Approved Vendor GGM22NT73 36 in 5 1⁄4 in 11" 7⁄8" Approved Vendor GGM22NT74

15 3⁄4 in 10 in 5 1⁄4 in 14" 7⁄8" Approved Vendor GGM22NT64 12 in 5 1⁄4 in 14" 7⁄8" Approved Vendor GGM22NT68

19 3⁄4 in 10 in 5 1⁄4 in 18" 7⁄8" Approved Vendor GGM22NT65 12 in 5 1⁄4 in 18" 7⁄8" Approved Vendor GGM22NT69 Vulcanized Rubber D-Shape

12 in 1 3⁄4 in 2 in 6" 3⁄8" Approved Vendor GGM22NT58 4 in 4 1⁄4 in 6" 7⁄8" Approved Vendor GGM22NT61

24 in 1 3⁄4 in 2 in 18" 3⁄8" Approved Vendor GGM22NT59 4 in 4 1⁄4 in 18" 7⁄8" Approved Vendor GGM22NT62

36 in 1 3⁄4 in 2 in 15" 3⁄8" Approved Vendor GGM22NT60 4 in 4 1⁄4 in 15" 7⁄8" Approved Vendor GGM22NT63

APPROVED VENDOR, VESTIL