AMC 2026 catalogue

Pumps

Find even MORE at Grainger.ca 1633

1-888-602-0000 PUMPS Dewatering Pumps

Multipurpose Barbed Hose Fittings Connect hoses without using tools, clamps, or ferrules. Also used to repair damaged hoses to help extend their life. They have raised ridges (or barbs) on one end that hold the fitting in place when it's pushed into a hose, creating a leak-resistant seal. These push-on hose fittings are commonly used on the jobsite to create hose assemblies for conveying air, fluids, and chemicals in industrial plants, construction sites, machine-tool applications, utility equipment, and automotive shops.

For Hose I.D.

Hose Fitting B Size Material Brand

Item

No. Barbed Hose Fitting

1⁄2 in 3⁄8 in 316 Stainless Steel Approved Vendor WWG3DTN7 1 1⁄2 in 1 1⁄2 in Polypropylene Banjo WWG3DTV2 2 in 2 in 316 Stainless Steel Approved Vendor WWG3DTW4

APPROVED VENDOR, BANJO

Water Suction and Discharge Hose

▪Flexible ▪Mild chemical resistance ▪Reinforced to retain shape and prevent collapsing ▪Installed fittings at both ends PVC (polyvinyl chloride) assembly used to vacuum or pump water in construction and septic-tank cleaning operations and for general industrial and agricultural applications that require a hose with mild chemical resistance. For fresh, salt and deionized water transfer.

Item Length

Hose Inside Dia. Includes

Item

No. Hoses

Water Suction and Discharge Hose 20 ft. 2 in Gasket WWG4YLN3

APPROVED VENDOR

Electric Utility and Dewatering Pumps

▪1-phase thermally protected motors ▪Nonclog impeller Use to drain standing water in shallow areas such as basements, window wells, sumps, rooftops, and construction and dump sites. For a complete list of standards and specifications, go to Grainger.ca and search for individual products.

WWG3P993 GGM1XHV4 GGM3YU54

* 304 SS = 304 Stainless Steel, ABS = acrylonitrile butadiene styrene, AL = aluminum, CI = cast iron, DI = ductile iron, GFN = glass-filled nylon, N = nylon, PA = polyamide, POM = acetal, PP = polypropylene, PU = polyurethane, RBR = rubber, RU = rubberized urethane, SS = stainless steel, TPL = thermoplastic, VT = Valox®. † Operation of pump in this range will result in reduced pump life and/or motor damage.

Pump

HP Height Diameter

Base Material

Pump Body

Material

Impeller Material Discharge NPT Voltage

Cord Length

Max. Diameter

Solids

Max. Liquid Temp.

GPM of Water @ 5 ft. of Head

GPM of Water @ 15

ft. of Head

Max Head Brand

Mfr. Model

No.

Item

No. — 10 1⁄2" 6" PP — — 1 1⁄4 in — — 1⁄8 in 104° F 32 14 — Dayton 3YU55 GGM3YU55 1 1⁄4 18 1⁄2" 7 3⁄16" RU SS PU 2 in 120 VAC 50 ft. 1⁄4 in 104°F † 104 50 ft Dayton 4LA43 GGM4LA43

1⁄2 12" 7 7⁄32" Plastic Plastic Plastic 2 in 120 VAC 9 ft. — 104°F 55 36 34 ft Zoeller 46-0005 WWG6JGV8 16 15⁄16" 9 1⁄8" CI SS 304 SS 2 in 120 VAC 20 ft. 1⁄4 in 104°F 74 51 36 ft Dayton 1XHV4 GGM1XHV4 16 15⁄16" 6 1⁄2" SS SS SS 1 1⁄2 in M 120 VAC 20 ft. 3⁄16 in 104°F 83 49 35 ft Dayton 11C687 GGM11C687 1⁄3 10 1⁄2" 6" PP PP PA 1 1⁄4 in M 120 VAC 10 ft. 1⁄8 in 104°F 41.7 22.2 25 ft Dayton 3YU56 GGM3YU56

1⁄4

7 3⁄8" 4" POM VT GFN 1 1⁄8 in 120 VAC 8 ft. 3⁄32 in 104°F 21 — 15 ft Rule A53S WWG3P993

8" 4 1⁄2" — VT FRN

1 1⁄8 in Hose Barb, 3⁄4 in FGHT,

1 in MNPT 120 VAC 24 ft. — 104 Degrees F 30 — 17 ft Rule A53S24-GRA WWG3P994

9" 7" SS SS PA 1 1⁄4 in M 120 VAC 15 ft. 1⁄8 in 104°F 19 8.8 23 ft Dayton 3YU64 GGM3YU64 11 3⁄4" 6" TPL TPL TPL 1 1⁄4 in 120 VAC 9 ft. 3⁄32 in 104°F 30 12 20 ft Dayton 2VAN7 WWG2VAN7

1⁄6 10 1⁄2" 6" PP PP PA 1 1⁄4 in M 120 VAC 10 ft. 1⁄8 in 104°F 16.7 6.7 20 ft Dayton 3YU54 GGM3YU54 12" 6" ABS Plastic ABS ABS 1 in M 120 VAC 8 ft. 1⁄8 in 120°F 20 13.8 25 ft Red Lion 505950 WWG19T430 7⁄10 17 3⁄4" 7 3⁄16" RU SS PU 2 in 120 VAC 50 ft. 1⁄4 in 104°F † 76 38 ft Dayton 4LA45 GGM4LA45

1 13 7⁄16" 7 9⁄16" Steel Die Cast Aluminum

Urethane

Rubber 2 in 120 VAC 50 ft. 1⁄4 in 104°F 82 72 59 ft Tsurumi LB-800-62 (115V)WWG38H468

18 1⁄8" 10 3⁄8" CI SS 304 SS 2 in 120 VAC 20 ft. 3⁄8 in 104°F 90 69 49 ft Dayton 1XHV5 GGM1XHV5

DAYTON, RED LION, RULE, TSURUMI, ZOELLER