AMC 2026 catalogue

Machining

Feeler Gauge Sets and Calipers

Find even MORE at Grainger.ca 1335

1-888-602-0000 MACHINING

Pitch Gauges Pitch size is stamped on each gauge.

MTT188-111

Description Range Item No. Whitworth 55° (30 Leaves) — MTT188-101 Whitworth 55° (28 Leaves) 4 to 60 TPI MTT188-102 Unified 60° (30 Leaves) — MTT188-111 Metric 60° (18 Leaves) 0.4 to 7.0 mm MTT188-121 Metric 60° (21 Leaves) 0.4 to 7.0 mm MTT188-122 Metric and Unified

60 ° (51 Leaves) 4 to 42 TPI 0.4 to 7.0 mm MTT188-151

MITUTOYO

Screw Pitch Gauges Pitch size is stamped on each gauge. Starrett screw pitch gauges feature a locking device on both ends of the case, so leaves can be securely locked in position for use.

STA159M

Description

Range of Pitches

per Millimeter

Item

No. Metric 60° (28 Leaves) 0.5 to 11.5 STA159M Metric 60° (28 Leaves) 0.25 to 2.5 STA156M

STARRETT

English Standard Wire Gauge – Hardened

For gauging iron wire, hot and cold rolled sheet steel, and in some cases sheet iron by the English Standard wire system.

Description Range Item No. English Standard Wire Gauge #0 to #36 STA188

STARRETT

Drill Point Gauge For use in drill grinding.

Blade Length (in.) Head Bevel

Item

No. 6 59° STA22C

STARRETT

American Standard Wire Gauge – Hardened Useful for electricians and others to gauge sheet, plate and wire made of non-ferrous metals like copper, brass, aluminum, etc.

Description Range

Item

No. American Standard

Wire Gauge #0 to #36 STA281

STARRETT

Standard Feeler Gauge Set

Description

Item

No. 9 Blade Standard Feeler Gauge Set PRT000A

PROTO

▪9 short blades

1⁄2" x 3" ▪Sizes 0.003",

0.004", 0.005", 0.006", 0.008", 0.010", 0.012", 0.015", 0.018" in No. 000C holder ▪Blades etched

with both decimal and metric sizes

Master Feeler Gauge Set

▪25 short blades in holder No. 000C ▪Sizes 0.0015" thru 0.040" except 0.019" ▪All blades are etched with both

decimal and metric sizes

Description

Item

No. 25 Blade Master Set PRT000AA

PROTO

Step Cut Feeler Gauge Set Includes 22 Go and No-Go blades 1⁄2" wide by 3" long in holder. Each blade has two different thicknesses. Sizes: 0.004/0.006", 0.005/0.007", 0.006/0.008", 0.007/0.009", 0.008/0.010", 0.009/0.011", 0.010/0.012", 0.011/0.013", 0.012/0.014", 0.013/0.015", 0.014/0.016", 0.015/0.017", 0.016/0.018", 0.017/0.019", 0.018/0.020", 0.019/0.021", 0.020/0.022", 0.021/0.023", 0.022/0.024", 0.023/0.025", 0.024/0.026", 0.025/0.027". Blades are etched with both decimal size and metric equivalent.

Description

Item

No. 22 Blade Step Cut Set PRT000N

PROTO

Long Feeler Gauge Set

Includes 25 blades 1⁄2" wide by 12" long in steel holder. Sizes: 0.0015", 0.002" thru 0.021", 0.025", 0.027", 0.030", 0.040". Each blade is etched with decimal size and metric equivalent.

Description

Item

No. 25 Blade Master Set PRT000TL

PROTO

Overhead Valve Feeler Gauge Set Includes 16 blades 1⁄2" W x 4" L for setting overhead valves. Sizes 0.009", 0.010", 0.011", 0.014", 0.015", 0.016", 0.017", 0.018", 0.019", 0.020", 0.021", 0.023", 0.024", 0.025", 0.026", 0.027". Each blade is etched with both the decimal size and metric equivalent. Description

Item

No. 16 Blade Bent Set PRT000R

PROTO

Carpenters' & Sheet Metal Workers' Extension Dividers No. 85 extension dividers are exceptionally rigid although light in weight and easy to handle. The head is made of forged steel. The hardened points are well shaped and bent slightly so they can be rotated and brought closer together if desired.

Range Item No. 9 in STA85B

STARRETT