AMC 2026 catalogue

Pneumatics

Nibblers, Shears and Hammers

Find even MORE at Grainger.ca 1571

1-888-602-0000 PNEUMATICS

Pneumatic Nibblers For accurate cutting of cold rolled steel, plastic, tin, aluminum, and a variety of other metals. Leaves sheet metal smooth and free from burrs and distortion. Easy to operate and control. Well balanced, lightweight tools. GGF21AC15 IRG325B

Strokes per Minute Average Air Consumption (CFM) Air Inlet Min. Hose Size Brand

Item

No. 2,600 4.0 Female 3⁄8 in Speedaire GGF21AC15 2,750 4.2 Female 3⁄8 in Chicago Pneumatic CNPCP835 3,200 4.0 Female 3⁄8 in INGERSOLL RAND IRG325B

CHICAGO PNEUMATIC, INGERSOLL RAND, SPEEDAIRE

Reciprocating Air Saws and Air Shears

IRG429

CNPCP785S

Strokes per Minute

Average CFM @ 15 Second Run Time CFM @ Full Load Overall Length Brand

Item

No. Air Shears

2,400 3.70 15.5 8 1⁄4" Chicago Pneumatic CNPCP785S 2,600 4.00 16.0 9 1⁄16" Speedaire GGF21AC07 4,200 4.00 21.0 9.4" Ingersoll Rand IRG7802SA Reciprocating Saws

7,500 0.70 1.3 6 1⁄8 in Speedaire GGF10D241 9,000 2.00 8.0 10 3⁄8 in Speedaire GGF21AC08 9,500 1.10 1.1 9 3⁄4 in Ingersoll Rand IRG529

10,000

1.50 5.5 8 1⁄2 in Chicago Pneumatic CNPCP7900 1.50 5.5 9 in Chicago Pneumatic CNPCP7901K 1.50 5.5 9 in Chicago Pneumatic CNPCP7901 2.00 10.0 9 1⁄4 in Speedaire GGF21AC09 2.50 8.0 8 1⁄4 in Ingersoll Rand IRG429

CHICAGO PNEUMATIC, INGERSOLL RAND, SPEEDAIRE

Air Hammers

▪Required psi: 90 ▪Air inlet: 1⁄4" NPT ▪Min. hose size: 3⁄8", except

No. GGF21AC13 is 1⁄2" and WWG45NW68 is 1⁄4" ▪Use 0.401" shank chisels

(Nos. WWG45NW68 and CNPCP717 use 0.498")

▪Spring-type chisel retainer Suitable for chipping, general sheet metal cutting, light vehicle exhaust work, scraping, and rivet or joint removal and separation.

Note: Be sure that the chisel is held securely against the work surface and is never allowed to "free fire", or allow the chisel to strike the retainer.

WWG45NW68 IRG772 CNPCP7110

Blows per Minute Stroke Length

Average CFM @ 15 Second Run Time CFM @ Full Load Overall Length Brand

Mfr. Model

No.

Item

No. 1,500 3 3⁄8 in 3.20 13.0 7 7⁄8 in Speedaire 45NW68 WWG45NW68

1,725 4 in 3.00 11.0 8 1⁄2 in Ingersoll Rand 132 IRG132 4 in 3.20 13.0 8 3⁄4 in Ingersoll Rand AVC13A1 IRGAVC13A1 1,800 2 3⁄4 in 3.20 13.0 7 1⁄2 in Chicago Pneumatic CP717 CNPCP717

2,000

3 1⁄2 in 2.10 8.5 7 1⁄2 in Chicago Pneumatic CP714 CNPCP714 3 1⁄2 in 3.00 14.0 10 in Ingersoll Rand 117 IRG117 3 1⁄2 in 3.00 15.0 10 in Ingersoll Rand 117K IRG117K 3 1⁄2 in 4.00 8.0 9 in Speedaire 21AC10 GGF21AC10

2,100 3 1⁄2 in 2.80 8.0 11 in Speedaire 21AC13 GGF21AC13 3 in 3.20 13.0 7 3⁄4 in Ingersoll Rand AVC12A1 IRGAVC12A1

2,300 3 1⁄2 in 7.00 25.0 6 3⁄4 in Chicago Pneumatic CP7150 CNPCP7150 3 1⁄2 in 6.25 25.0 8 7⁄8 in Chicago Pneumatic CP7150K CNPCP7150K 3 1⁄2 in 3.00 15.0 9 1⁄2 in Speedaire 12V728 GGF12V728

2,530 3 1⁄2 in 11.25 2.9 9 1⁄8 in Ingersoll Rand 119MAX IRG119MAX 3 1⁄2 in 11.25 2.9 9 1⁄8 in Ingersoll Rand 119MAXK IRG119MAXK 2,800 2 1⁄8 in 2.00 10.0 6 3⁄4 in Speedaire 12V729 GGF12V729

3,000

2 1⁄4 in 3.00 12.0 7 3⁄8 in Ingersoll Rand 772 IRG772 2 1⁄4 in 3.00 15.0 7 5⁄8 in Ingersoll Rand 121-K6 IRG121K6 2 1⁄4 in 3.00 15.0 7 5⁄8 in Ingersoll Rand 121/Q IRG121Q 2 5⁄8 in 6.25 25.0 6 3⁄4 in Chicago Pneumatic CP7111 CNPCP7111 2 5⁄8 in 7.00 25.0 6 3⁄4 in Chicago Pneumatic CP7111K CNPCP7111K

3,200

2 5⁄8 in 3.60 14.6 9 in Chicago Pneumatic CP7110 CNPCP7110 2 5⁄8 in 4.00 7.0 6 3⁄4 in Speedaire 21AC11 GGF21AC11 2 5⁄8 in 3.60 7.0 6 3⁄4 in Speedaire 21AC12 GGF21AC12 2 5⁄8 in 4.10 7.0 6 3⁄4 in Speedaire 21AC14 GGF21AC14

3,500 2 5⁄8 in 3.00 15.0 7 7⁄8 in Ingersoll Rand 116 IRG116 2 5⁄8 in 3.00 15.0 7 7⁄8 in Ingersoll Rand 116K IRG116K

3,530 2 5⁄8 in 2.90 11.6 7 1⁄4 in Ingersoll Rand 123MAX IRG123MAX 2 5⁄8 in 11.25 2.9 7 1⁄4 in Ingersoll Rand 123MAXK IRG123MAXK

5,000 1 5⁄8 in 2.00 14.0 6 1⁄8 in Ingersoll Rand 115K IRG115K 1 5⁄8 in 2.00 14.0 6 1⁄8 in Ingersoll Rand 115 IRG115

CHICAGO PNEUMATIC, INGERSOLL RAND, SPEEDAIRE

Bench Sand Rammer Ideal for compacting sand molds in a foundry or casting facility. Compact, lightweight with long throttle lever. Double action seal keeps damaging sand from entering tool reducing wear and extending tool life.

Description Weight with Butt (lbs.) Length with Butt (in.) Barrel Bore (in.) Piston Stroke (in.) Blows per Min. (BPM)

Item

No. Bench Type 11 9⁄16 21 1⁄2 1 2 1⁄2 870 IRG130A1M

INGERSOLL RAND