AMC 2026 catalogue

Adhesives, Sealants & Tape

Rubber Repair

Find even MORE at Grainger.ca 1251

1-888-602-0000 ADHESIVES, SEALANTS & TAPE

DVC15820

Rubber Repair Flexane® 80 Putty Trowelable urethane for repairing and lining process equipment exposed to wear, impact, abra- sion, vibration, and expansion/contraction.

▪Mixes easily and trowels on smoothly ▪Cures to a tough medium-

hard rubber (Shore A 87) ▪Service temperatures to 180° F dry, 120° F wet ▪Flexane® primers are recommended

for maximum adhesion to metal, rubber, and concrete surfaces. Flexane® High Performance Putty Trowelable lining for maximum protection against abrasion, gouging, and impact.

▪For lining and protection processing

equipment and repairing rubber parts where high impact resistance is needed ▪Cures to resilient rubber (Shore A 78) ▪Flexane® primers are recommended

for maximum adhesion

Flexane® Fast Cure Putty & Liquid Flexane® Fast Cure Putty and Liquid are available in convenient 400 mL cartridges for fast and economical rubber repairs. Fast Cure Putty is ideal for repairing rubber equipment, while Fast Cure Liquid is a convenient and time-saving method of filling expansion joints.

▪8-minute working time; tack-

free in just 30 minutes ▪400 mL cartridge for fast, easy,

no-mess dispensing ▪Automatic mix nozzle thoroughly mixes

the two components. The tip can be trimmed for varied bead sizing Flexane® Primers Required for maximum adhesion of Flexane® products.

▪FL-10 primer for all metals ▪FL-20 primer for rubber, wood,

fiberglass, and concrete

Description

Item

No. Flexane® 80 Putty, 1 lb. DVC15820 Flex-Add™, 8 oz. DVC15940 Flexane® HP Putty, 1 lb. DVC15330 Flexane® Fast Cure Putty, 400 mL DVC15049 Flexane® Fast Cure Liquid, 400 mL DVC15050

Description

Item

No. Manual Dispenser DVC15043 Mix Nozzle DVC15047 Flexane® Primer FL-10, 4 oz. DVC15980 Flexane® Primer FL-20, 4 oz. DVC15985

DEVCON, FLEX ADD

DVC11320

Devcon® DFense Blok™

DFense Blok™ Wearing Compound

▪Superior sliding abrasion resistance ▪Withstands high impact conditions ▪No sagging on vertical or overhead surfaces DFense Blok™ Fast Cure (FC)

▪Faster curing version of DFense Blok™

▪Allows equipment to be returned to service in 2 hours ▪Less prone to unexpected fractures DFense Blok™ Surface Wetting Agent (SWA)

▪Zero wait time before applying DFense Blok™

▪Allows superior adhesion to vertical and overhead surfaces ▪Use in place of expanded meta ▪Orange colour for easy visual inspection DFense Blok™ Quick Patch

▪The only ceramic bead-filled wear and abrasion

resistant epoxy for emergency repair ▪Eliminates downtime with exceptionally fast cure New innovative line of specially formulated wear abrasion products design to outperform and outlast traditional wear and abrasion epoxies.

Description Type Colour Mixing Ratio Size (lbs.)

Tensile Strength (PSI) Work Life (min.)

Functional Cure (hrs.)

Item

No. DFense Blok™ Wearing Compound Protection Epoxy Compound Gray 2:1 30 2,616 25 4 - 5 DVC11330 DFense Blok™ Fast Cure (FC) 2 Part Epoxy Gray 2:1 9 2,764 15 2 - 3 DVC11350 DFense Blok™ Quick Patch 2 Part Epoxy Gray 1:1 1 2,495 4 30 min DVC11320 DFense Blok™ Surface Wetting Agent Epoxy Gel Orange 2:1 — 2,616 15 4 - 5 DVC11340

DEVCON, DFENSE BLOK, PLASTIC STEEL

Devcon® Epoxy Wear Guard High Load

Type Materials Bonded Colour Mixing Ratio Total Volume

Item

No. High-Alumina, Ceramic Bead-Filled

Epoxy System

Metal Gray 2:1 30 lb DVC11490

WEAR GUARD