AMC 2026 catalogue

Plumbing

Clamps & Supports

Need a price? Log in or register at Grainger.ca 1768

PLUMBING

Split Ring Hangers Use for suspending stationary, noninsulated pipelines. Allow for piping runs close to ceiling or walls. Bolt and rivet are carbon steel. Meet Federal Specification WW-H-171 (Type 25), MSS SP-58 (Type 12).

GGM22FP62

GGM22FP59

Pipe Size (in.) Max. Load (lbs.)

Item

No. Copper Plated Malleable Iron

1⁄2 in 180 lb GGM22FP62 3⁄4 in GGM22FP63 Electro Galvanized Malleable Iron

1⁄2 in

180 lb

GGM22FP57 3⁄4 in GGM22FP58 1 in GGM22FP59 1 1⁄2 in GGM22FP60 2 in GGM22FP61

APPROVED VENDOR

Non-Metallic Clamps

Tube and Pipe Clamps—Push the tube into the clamp to close and lock the pipe into place. Fasten with wood screw, dual-threaded screw with or without collar, nail with collar, or 1⁄4" threaded rod. UV resistant and suitable for outdoor applications.

Hinge Clamp—Use where reduction of weight and reduced thermal conduc- tivity transfer is desired. Fiberglass reinforced nylon construction. Use on non-metallic to non-metallic, non-metallic to metallic, and metallic to metallic sanitary mechanical joints. Accepts sanitary ferrules according to BS 4825, ISO 2852 and Tri-Clover® Standards.

WWG12G287

Pipe Size (in.) Tube Size (in.) Max. Load (lbs.) Brand

Item

No. Tube and Pipe Clamp

— 3⁄8 in 35 lb Nvent Caddy WWG1RUZ3 — 1⁄2 in 40 lb Nvent Caddy WWG1RUZ4 3⁄8 in 5⁄8 43 lb Nvent Caddy WWG1RUZ5 1⁄2 in — 45 lb Nvent Caddy WWG1RUZ6 — 3⁄4 in 48 lb Nvent Caddy WWG1RUZ7 3⁄4 in — 54 lb Nvent Caddy WWG1RUZ8 — 1 in 58 lb Nvent Caddy WWG1RUZ9 1 in 1 1⁄4 in 67 lb Nvent Caddy WWG1RVA1 1 1⁄4 in 1 1⁄2 in 80 lb Nvent Caddy WWG1RVA2 1 1⁄2 in — 84 lb Nvent Caddy WWG1RVA3 — 2 in 90 lb Nvent Caddy WWG1RVA4 2 in — 92 lb Nvent Caddy WWG1RVA5 Hinge Clamp

— 1 in to 1 1⁄2 in — Rubberfab WWG12G287

NVENT CADDY, RUBBERFAB

Pipe Support Block

WWG1CWH4—Innovative design won't damage roof membranes. No tools or fasteners needed; can either be bonded to the roof or float with pipe expansion and contraction. Handles up to three 1⁄2", two 3⁄4", or one 1" pipe or conduit.

Max. Load (lbs.) Pipe Size (in.)Length (in.) Width (in.)

Height

(in.) Brand

Item

No. 25 lb 1⁄2 in to 1 in 5 11⁄16 in 4 11⁄16 in 3 5⁄8 in Nvent Caddy WWG1CWH4

NVENT CADDY

Strut Channel Washers, Clamps, and Nuts

Strut Pipe Clamp—For securing pipe, tubing, and conduit to strut channel. Designed to help ensure the cushion stays in place.

WWG6PFR5

Thread Size (in.) Width (in.) Height (in.) Brand

Item

No. Channel Nut

3⁄8 in 1 2⁄5 in 1⁄2 in Nvent Caddy WWG6PFR5

Max. Load (lbs.) Brand

Item

No. Strut Pipe Clamp

1,000 lb Approved Vendor GGM22FP73

APPROVED VENDOR, NVENT CADDY