AMC 2026 catalogue

Pumps

Submersible Effluent Pumps

Find even MORE at Grainger.ca 1629

1-888-602-0000 PUMPS

Goulds Water Technology Submersible Sump Pumps

▪Max. temp.: 130°F Cast-iron pumps feature capacitor-start motors that provide the greatest torque of any single-phase motor. With built in thermal overload protection and severe-duty rated power cords. Rated for continuous duty when fully submerged. Manual operation (switch not included).

HP

Discharge

NPT Height Diameter Base Material

Impeller Material

GPM of Water @ 5 ft. of Head

GPM of Water @ 15 ft. of Head Max Head

Max. Diameter Solids Amps Cord Length

Item

No. 1⁄3 2 in 16" 11 1⁄2" Cast Iron Cast Iron 0 52 30 ft 3⁄4 in 10.70 20 ft. WWG2NUZ6 1⁄3 2 in 16" 11 3⁄4" Cast Iron Cast Iron 87 61 27 ft 3⁄4 in 10.70 20 ft. WWG2NUZ4 1⁄2 2 in 16" 11 3⁄4" Cast Iron Cast Iron 62 53 61 ft 3⁄4 in 14.50 20 ft. WWG2NVC1 1⁄2 2 in 16" 11 3⁄4" Cast Iron Cast Iron 85 70 46 ft 3⁄4 in 14.50 20 ft. WWG2NUZ8 1 1⁄2 2 in 16" 11 3⁄4" Cast Iron Cast Iron 97 93 128 ft 3⁄4 in 15.70 20 ft. WWG2NVC5

GOULDS WATER TECHNOLOGY

WWG2NUZ4

WWG2JGA4 GGM3BB96 GGM3BB88

Dayton® Submersible Sewage Pumps

▪Permanently lubricated,

maintenance-free motors ▪Nonclog vortex impeller design

Notes: Operating pump outside of specified range may result in pump damage and/or shortened pump life. Self-contained pumps are suitable for dewatering, effluent, flood control, liquid transfer, sewage, solids-laden wastewater, and sump drainage in commercial, industrial, and residential applications.

Pump

HP Switch Type

Discharge

NPT Height Diameter Voltage Amps

Max. Liquid Temp. Base Material

Pump Body

Material

Impeller Material

GPM of

Water @ 10 ft. of Head

GPM of

Water @ 30 ft. of Head

Max Head

Max. Diameter

Solids

Item

No. Single

4/10 Tether 2 in 17 3⁄4" 9 1⁄4" 120 VAC 11.00 130°F Stainless Steel Stainless Steel Stainless Steel 75 — 25 ft 2 in WWG2JGA4

1⁄2 No Switch Included 2 in 16 3⁄4" 10 3⁄4" 120 VAC 12.00 104°F 303 Stainless Steel Cast Iron Cast Iron 111 — 25 ft 2 in GGM4HU80 Tether 2 in 15 3⁄16" 10 3⁄4" 120 VAC 12.00 104°F 303 Stainless Steel Cast Iron Cast Iron 111 — 25 ft 2 in GGM3BB88 Tether 2 in 17 3⁄4" 9 1⁄4" 120 VAC 12.30 130°F Stainless Steel Stainless Steel Stainless Steel 80 22 32 ft 2 in WWG2JGA5

1 No Switch Included 2 in 17 3⁄4" 9 1⁄4" 240 VAC 9.20 130°F Stainless Steel Stainless Steel Stainless Steel 126 50 42 ft 2 in WWG2JGA6 Vertical 2 in 21 1⁄4" 16 3⁄4" 200 - 240 VAC 8.30 104°F 303 Stainless Steel Cast Iron Cast Iron 195 48 36 ft 2 in GGM4LB99 Three

1 No Switch Included 2 in 17 3⁄4" 9 1⁄4" 460 VAC 2.60 130°F Stainless Steel Stainless Steel Stainless Steel 112 52 46 ft 2 in WWG2JGA7 3 No Switch Included 3 in 26 1⁄2" 17" 460 VAC 12.90/6.10 104°F 303 Stainless Steel Cast Iron Cast Iron * 210 52 ft 2 1⁄2 in GGM3BB96

DAYTON

1-Phase, Automatic—Have permanent split capacitor (PSC) motors.

1-Phase, No Switch—Have permanent split capacitor (PSC) motors with overload protection.

3-Phase—Motors are squirrel cage induction with Class B insulation.

* Operation of pump in this range will result in reduced pump life and/or motor damage.

Submersible Effluent Pumps

▪Permanently-lubricated, maintenance-free motors ▪Nonclog vortex impeller ▪20-ft. power cord Self-contained and suitable for a variety of commer- cial, industrial, or residential applications including circulation, dewatering, effluent, flood control, liquid transfer, septic tanks, sump drainage, and wastewater removal. Stainless steel motor shafts and hardware. No. LGP506807 centrifugal, self-priming effluent pump is designed for installations with septic tanks in areas with drainage problems. Cast iron casing 1 1⁄4" NPT suction and discharge. Motor CSA approved. Built-In check valve. GGM3BB76 GGM2JGA3 GGM4HU75 GGM3BB83

HP Switch Type

Operation

Type On Point Off Point

Discharge

NPT Height Diameter

Impeller Material

GPM of Water @ 5 ft. of Head

GPM of Water @ 15

ft. of Head Max Head

Max. Diameter

Solids Amps

Item

No. Cast Iron

1⁄2 No Switch

Included Manual — — 2 in 16 3⁄4" 12 3⁄16" Polypropylene 79 70 79 ft 3⁄4 in 11.90 GGM4HU75

1⁄2 Tether Automatic — — 2 in 16 3⁄4" 12 1⁄4" Polypropylene 77 70 79 ft 3⁄4 in 11.90 GGM3BB83 Stainless Steel

1⁄2 Tether Automatic 11 1⁄2 in 4 1⁄4 in 2 in 16 3⁄4" 6 1⁄2" Stainless Steel 95 77 36 ft 1 1⁄2 in 11.70 GGM2JGA3 Cast Iron

1⁄3 Tether — Variable Variable 1 1⁄2 in F 11 3⁄4" 9 1⁄8" Cast Iron 65 45 30 ft 1⁄2 in 6.80 GGM3BB76

DAYTON