AMC 2026 catalogue

Hardware

Door Releases and Strikes

Find even MORE at Grainger.ca 1171

1-888-602-0000 HARDWARE

WWG2MXL3

Electric Strikes Electric strikes control access by either holding or releas- ing a latch bolt. Hard-wire electric strikes connect to a power source and a controller (typically a push-button switch, keypad, or card reader). No. WWG2MXL3 is stain- less steel and burglary-resistant.

A fail-safe electric strike needs power to remain locked. A fail-secure electric strike remains locked even without power. Device prevents entry; a doorknob or lever on the lock allows for egress. Rectifiers convert AC power to DC.

† Fire-rated, stainless steel, and UL 1030 burglary-resistant. ‡ Stainless steel and burglary-resistant.

Type For Use With

Failure

Mode

Input Voltage

Door Frame Type

Faceplate

Width

Faceplate

Height

Faceplate

Depth Pull Force Grade

Item

No. Electric Strike

Heavy Duty

Rim Type Exit

Devices with Up to 30 lbs. of

Preload Force

Fail Safe or Fail Secure 24 VDC Aluminum 1 3⁄4 in 9" 1⁄2 in 1,000 lbs. 2 WWG2MXL3

Heavy Duty

Cylindrical Locksets

with Up to 30 lbs.

of Preload Force

Fail Safe or Fail Secure 12 VDC Hollow Metal 1 1⁄4" 4 7⁄8" 1 11⁄16 in 1,500 lbs. 1 WWG2MXL6

Surface Mount Rim Exit Device Fail Safe or Fail Secure 12/24VDC Hollow Metal/Wood 1 3⁄4 in 9" 3⁄4 in 1500 lb. 1 WWG2MXN2

Rectifier AC to DC

Wire In HES Electric Strikes — 35 V, 2 A — — — — — — WWG2MXK9

HES

Fail-secure strikes fit in frames for aluminum or wood doors in storefronts and other commercial and retail applications. Strikes exceed 500,000 cycles and 70 ft.-lb. dynamic force. Series 7130 strikes are for use when converting from an Adams Rite MS® pivoted-bolt deadlock to a deadlatch.

WWG2EUU3 WWG2EUT8

Narrow Stile Electric Strikes, Grade 1

▪1500-lb. holding force ▪1⁄2" bolt throw ▪Case size: 1" x 3 3⁄8" x 1 5⁄8"D ▪Strike opening: 5⁄8" x 1 7⁄16" x 1⁄2"D

Finish Faceplate Height Input Voltage Standards

Item

No. Aluminum

Dark Bronze Anodized 4 7⁄8" 24 VAC/12 VDC ANSI/BHMA EO933 WWG2EUT9 Dark Bronze Anodized 4 7⁄8" 24 VAC/12 VDC ANSI/BHMA EO937 WWG2EUU4 Satin Aluminum 4 7⁄8" 24 VAC/12 VDC ANSI/BHMA EO932 WWG2EUT8 Satin Aluminum 4 7⁄8" 24 VDC ANSI/BHMA EO934 WWG2EUU1 Satin Aluminum 4 7⁄8" 24 VAC/12 VDC ANSI/BHMA EO936 WWG2EUU3 Hollow Metal/Wood

Satin Aluminum 6 7⁄8 in 24 VAC/12 VDC ANSI/BHMA EO940 WWG2EUU7

ADAMS RITE

WWG6T310

Electromagnetic Door Releases

Hold doors open until released by a fire alarm system, remote smoke detector, or other switching device. Fail-safe operation—power failure releases door to a closed position. Door closer is required to close door. Surface-mount models require a surface adapter housing (junction box), which is included. Recessed-mount models are for concealed wiring applications and mount on 2" x 4" outlet boxes.

Type Power Required Holding Force

Projection from Wall Total Projection

Lock Body Length

Item

No. Rixson

Wall Mount, Surface

0.08 A @ 12VDC, 0.08A @ 24VAC/DC, 0.08A @ 120VAC 30 lbs. 2 3⁄8" 4 in 4 5⁄8" WWG6T310

Wall Mount, Recessed

0.08 A @ 12VDC, 0.08A @ 24VAC/DC, 0.08A @ 120VAC 30 lbs. 7⁄8 3 5⁄8 in 4 5⁄8" WWG6T308

Extension Kit — — — Adds 1 1⁄2 in

to 3 3⁄4 in — WWG1RM43

Edwards Signaling

Wall Mount, Surface 0.15A @ 120VAC, 0.15A @ 24VAC/DC 25 - 50 lbs. 2 7⁄16" 4 1⁄16 in 4 5⁄8" WWG2KFP1

Short Arm — — — 1 5⁄8 in — WWG34F729 Long Arm — — — 2 5⁄8 in — WWG34F730

EDWARDS SIGNALING, RIXSON