AMC 2026 catalogue

Plumbing

Couplings & Fittings

Need a price? Log in or register at Grainger.ca 1750

PLUMBING

Ductile-Iron Grooved Couplings, Flanges, and Gaskets Couplings and flanges meet applicable requirements of ASME B31.1, B31.9, and NFPA 13. Gasket material properties as designated in accordance with ASTM D2000.

Note: EPDM Gaskets not for use in petroleum applications.

WWG2XEU3

Size Material Brand

Item

No. Cam and Groove Gasket

2 1⁄2" EPDM Anvil WWG46KK81 3" EPDM Anvil WWG46KK82 4" EPDM Anvil WWG46KK83 5" EPDM Anvil WWG46KK84 8" EPDM Anvil WWG46KK86

Nominal Size Max. Pressure Max. Load Pipe End Separation Bolt Size Temp. Range Brand

Item

No. Rigid Coupling

2" 750 psi 3,323 lb. 0" to 1⁄8" 3⁄8" x 2 1⁄2" -40 Degrees to

250 Degrees F Gruvlok WWG2XET7

2 1⁄2" 750 psi 4,869 lb. 0" to 1⁄8" 3⁄8" x 2 1⁄2" -40° to 250°F Gruvlok WWG2XET8 3" 750 psi 7,216 lb. 0" to 1⁄8" 1⁄2" x 3" -40° to 250°F Gruvlok WWG2XET9 4" 750 psi 11,928 lb. 0" to 1⁄4" 1⁄2" x 3" -40° to 250°F Gruvlok WWG2XEU1 6" 750 psi 25,854 lb. 0" to 1⁄4" 5⁄8" x 3 1⁄2" -40° to 250°F Gruvlok WWG2XEU2 8" 600 psi 35,056 lb. 0" to 1⁄8" 3⁄4" x 4 1⁄2" -40° to 250°F Gruvlok WWG2XEU3 Metal Pipe Flange

2" 300 psi 1,329 lb. — 3⁄8" x 2 3⁄4" -40° to 230°F Gruvlok WWG2XEU4 2 1⁄2" 300 psi 1,948 lb. — 3⁄8" x 2 3⁄4" -40° to 230°F Gruvlok WWG2XEU5 3" 300 psi 2,886 lb. — 3⁄8" x 2 3⁄4" -40° to 230°F Gruvlok WWG2XEU6 4" 300 psi 4,771 lb. — 3⁄8" x 2 3⁄4" -40° to 230°F Gruvlok WWG2XEU7 6" 300 psi 10,341 lb. — 3⁄8" x 2 3⁄4" -40° to 230°F Gruvlok WWG2XEU8 8" 300 psi 17,528 lb. — 3⁄8" x 2 3⁄4" -40° to 230°F Gruvlok WWG2XEU9 Flexible Coupling

2" 1,000 psi 4,430 lb. 0" to 1⁄8" 1⁄2" x 3" -40° to 250°F Gruvlok WWG2XET1 2 1⁄2" 1,000 psi 6,492 lb. 0" to 1⁄8" 1⁄2" x 3" -40° to 250°F Gruvlok WWG2XET2 3" 1,000 psi 9,621 lb. 0" to 1⁄8" 1⁄2" x 3" -40° to 250°F Gruvlok WWG2XET3 4" 1,000 psi 11,928 lb. 0" to 1⁄4" 5⁄8" x 3 1⁄2" -40° to 250°F Gruvlok WWG2XET4 6" 1,000 psi 34,472 lb. 0" to 1⁄4" 3⁄4" x 4 1⁄2" -40° to 250°F Gruvlok WWG2XET5 8" 800 psi 46,741 lb. 0" to 1⁄4" 7⁄8" x 5 1⁄2" -40° to 250°F Gruvlok WWG2XET6

ANVIL, GRUVLOK

Ductile-Iron Grooved Fittings and Clamps

▪Clamp T fittings: max. pressure is 500 psi, temp. range is -40° to 230°F ▪Ductile iron fittings: max. pressure is 1000 psi, except 8" are 800

psi; temp. range is limited by connecting gaskets Fittings provide a reliable joint that resists external forces without special supports or expansion joints. Clamps attach at any location along the pipe to provide a quick and easy outlet that maintains a leaktight seal under both positive pressure and vacuum conditions. Can be used with water, diluted acids, alkali solutions, oil-free air, and other chemicals. Meet applicable requirements of ASME B31.1, B31.9, and NFPA 13.

Note: Not for use in petroleum applications.

WWG2XFA7

WWG2XEZ7

WWG2XEV1

Nominal Size

Item

No. Concentric Reducer Coupling

2 1⁄2" x 2" WWG2XFA6 3" x 2" WWG2XFA7 3" x 2 1⁄2" WWG2XFA8 4" x 2 1⁄2" WWG2XFC1 4" x 3" WWG2XFC2 6" x 4" WWG2XFC5

* Tees read: run x run x outlet.

Nominal Size

Item

No. Clamp-T with Threaded Branch

3" x 1 1⁄2" WWG2XEZ7 6" x 2" WWG2XFA2

Fitting Pipe Size

Round Cap Elbow Tee Item

No.

Item

No.

Item

No. Pipe Fittings and Couplings

2 in WWG2XFC8 — — 3 in WWG2XFC9 — — 4 in WWG2XFD1 — — 6 in WWG2XFD2 — — 8 in WWG2XFD3 — — 2 1⁄2 in WWG2XFE3 — — 2 in x 2 in — WWG2XEV1 — 2 1⁄2 in x 2 1⁄2 in — WWG2XEV2 — 3 in x 3 in — WWG2XEV3 — 4 in x 4 in — WWG2XEV4 — 6 in x 6 in — WWG2XEV5 — 2 1⁄2 in x 2 1⁄2 in — WWG2XEV8 — 3 in x 3 in — WWG2XEV9 — 4 in x 4 in — WWG2XEW1 — 2 1⁄2 in x 2 1⁄2 in x 2 1⁄2 in * — — WWG2XEW5

3 in x 3 in x 3 in * — — WWG2XEW6 4 in x 4 in x 4 in * — — WWG2XEW7

GRUVLOK