AMC 2026 catalogue

Pneumatics

Filter/Regulators

Need a price? Log in or register at Grainger.ca 1618

PNEUMATICS

General Purpose All-in-One Filter/Regulators

▪40-micron filter elements (Mini are 0.01

and Miniature are 5 micron) ▪Polycarbonate bowl: 150 max. psi; metal bowl: 250 max. psi ▪Modular connector allows easy removal and swap out ▪Air flow cfm measured with 150 psig inlet adjusted to a set

pressure of 90 psig (while increasing flow) and a 15 psig drop

Note: Polycarbonate bowls are not recommended for use in atmospheres containing chemicals such as acetone, benzene, carbon tetrachloride, ethylene dichloride, gasoline, toluene, and/or air compressor systems using fire-resistant lubricants.

WARNING: Do not connect to bottled gas.

WWG4ZK74

Type Bowl Material Connection Size Max. Flow Max. Temp. Adjustment Range Overall Height Overall Width Item No. Standard with Gauge and Bracket Polycarbonate 3⁄4 in NPT 212 cfm 125° F 5 - 150 PSI 11.93 in 3.125 in WWG4ZL02

Standard

Metal 1⁄2 in NPT 140 cfm 175° F 5 - 150 PSI 11.93 in 3.125 in WWG4ZK96 Metal 3⁄4 in NPT 212 cfm 175° F 5 - 150 PSI 11.93 in 3.125 in WWG4ZK98 Metal 3⁄8 in NPT 163 cfm 175° F 5 to 150 PSI 11.93 in 3.125 in WWG4ZK94 Polycarbonate 3⁄8 in NPT 163 cfm 125° F 5 - 150 PSI 11.93 in 3.125 in WWG4ZK95 Polycarbonate 1⁄2 in NPT 212 cfm 125° F 5 to 150 PSI 11.93 in 3.125 in WWG4ZK97 Polycarbonate 3⁄4 in NPT 212 cfm 125° F 5 to 150 PSI 11.93 in 3.125 in WWG4ZK99 Mini Oil Removal, Coalescing Polycarbonate 1⁄4 in NPT 4 cfm 125° F 5 to 100 PSI 6.57 in 1.625 in WWG4ZK81 Miniature with Brass Body Polycarbonate 1⁄4 in NPT 12 cfm 125° F 5 - 125 PSI 6.57 in 1.5 in WWG4ZK77

Miniature

Polycarbonate 1⁄8 in NPT 13 cfm 125° F 5 to 125 PSI 6.57 in 1.625 in WWG4ZK74 Polycarbonate 1⁄4 in NPT 14 cfm 125° F 5 to 125 PSI 6.57 in 1.625 in WWG4ZK75 Polycarbonate 1⁄4 in NPT 14 cfm 125° F 5 to 125 PSI 6.57 in 1.625 in WWG4ZK76

Intermediate with Gauge and Bracket Polycarbonate with Guard 3⁄8 in NPT 120 cfm 125° F 5 - 150 PSI 9.95 in 2.688 in WWG4ZK93 Polycarbonate with Guard 1⁄4 in NPT 80 cfm 125° F 5 - 150 PSI 9.95 in 2.688 in WWG4ZK92

Intermediate

Metal with Sight Gauge 1⁄4 in NPT 80 cfm 175° F 5 to 150 PSI 9.95 in 2.688 in WWG4ZK86 Metal with Sight Gauge 3⁄8 in NPT 120 cfm 175° F 5 to 150 PSI 9.95 in 2.688 in WWG4ZK88 Metal with Sight Gauge 1⁄2 in NPT 120 cfm 175° F 5 to 150 PSI 9.95 in 2.688 in WWG4ZK90 Polycarbonate with Guard 1⁄4 in NPT 80 cfm 125° F 5 to 150 PSI 9.95 in 2.688 in WWG4ZK87 Polycarbonate with Guard 3⁄8 in NPT 120 cfm 125° F 5 to 150 PSI 9.95 in 2.688 in WWG4ZK89 Heavy Duty, Yoke Mount Metal with Sight Gauge 1 in NPT 509 cfm 175° F 5 - 125 PSI 15.04 in 7.5 in WWG4ZK79

Compact

Metal with Sight Gauge 1⁄4 in NPT 80 cfm 150° F 5 - 150 PSI 8.72 in 2 in WWG4ZK82 Metal with Sight Gauge 3⁄8 in NPT 80 cfm 150° F 5 to 150 PSI 8.72 in 2 in WWG4ZK84 Polycarbonate with Guard 1⁄4 in NPT 80 cfm 125° F 5 to 150 PSI 8.72 in 2 in WWG4ZK83 Polycarbonate with Guard 3⁄8 in NPT 80 cfm 125° F 5 to 150 PSI 8.72 in 2 in WWG4ZK85

SPEEDAIRE

Modular Air Line Filters, Regulators & Lubricators

▪Patented 1⁄4 turn drain (except miniatures) ▪Metal bowls have prismatic sight glass ▪Mounting brackets and automatic drain kits available ▪15 to 20 ft. pipe runs ▪Integral flow sensor provides proportional control ▪Maintains a constant oil-to-air density

over a wide range of flow Air Line Filters Filters use both centrifugal action and depth filtration to remove entrained water, pipe scale, and particles. Airline filter for compressed air filtration has high flow to size ratio. Should be used as a pre-filter when installing oil removal filters.

Air Line Regulators Allows precise adjustment of compressed air pressures. Balanced valve design for accurate pressure control. Pull to adjust/press to lock adjustment knob. (2) full flow gauge ports. Manifold regulators provide multiple pressures from a common inlet. Air Line Lubricators Mist lubricators: for a single tool/device. Has a green 360° sight/feed dome where all visible oil drops are delivered to a single pneumatic component. Precision oil feed adjustment. Can be refilled under pressure. Uses: impact wrench, nut runner, air cylinder, etc.

LNC602208 LNC602108

NPT Size (in.)

Maximum Pressure (PSI)

Max. Temperature Adjustment Range (PSI) Bowl Type

Bowl/Adjustment

Knob Type Height (in.)

Width

(in.)

Item

No. (°F) (°C) Air Line Filters

1⁄4 250 150 65 — Metal w/Sight Glass — 6.02 1.98 LNC602104 3⁄8 250 150 65 — Metal w/Sight Glass — 6.02 1.98 LNC602106 1⁄2 250 175 79 — Metal w/Sight Glass — 7.95 3.15 LNC602108 Air Line Regulators

1⁄4 300 150 65 5 - 150 — T-Handle 5.31 2.0 LNC602004 1⁄4 300 150 65 5 - 150 — Knob 4.19 2.0 LNC602005 3⁄8 300 150 65 5 - 150 — T-Handle 5.31 2.0 LNC602006 3⁄8 300 150 65 5 - 150 — Knob 4.19 2.0 LNC602007 1⁄2 300 175 79 10 - 250 — T-Handle 7.64 3.15 LNC602008 1⁄2 300 175 79 5 - 150 — Knob 6.69 3.15 LNC602009 Air Line Lubricators

1⁄4 250 150 65 — Metal w/Sight Glass — 6.90 1.98 LNC602204 3⁄8 250 150 65 — Metal w/Sight Glass — 6.90 1.98 LNC602206 1⁄2 250 175 79 — Metal w/Sight Glass — 9.07 3.15 LNC602208

LINCOLN

General Purpose Modular Air Line Combination Units Three-piece units combine filter, regulator, and mist lubricator. Streamlined design requires less space. Provides the convenience of pre-selected air preparation components, and modularity. Includes Speed Clamp™ (s), mounting brackets, and pressure gauge. Some assembly required.

LNC85387-4

Maximum Max. Temperature NPT Size (in.)

Pressure

(PSI) (°F) (°C)

Adjustment Range (PSI) Bowl Type

Bowl Size (Oz.)

Height

(in.)

Width

(in.)

Item

No. 1⁄4 250 150 65 5 - 150 Metal w/Sight Glass 2.0 6.90 6.46 LNC85387-4 3⁄8 250 150 65 5 - 150 Metal w/Sight Glass 2.0 6.90 6.46 LNC85387-6 1⁄2 250 175 79 5 - 150 Metal w/Sight Glass 7.0 9.07 10.52 LNC85387-8

LINCOLN