AMC 2026 catalogue

Pumps

Submersible Sewage and Grinder Pumps

Need a price? Log in or register at Grainger.ca 1630

PUMPS

Air Operated Submersible Dewatering Pumps

▪Cast-iron, 2-vane trash-type impeller ▪Max. operating temp.: 160°F ▪Run-dry capability CE Certified. Self-priming pump operates at low speeds to handle mud, leaves, twigs, sand, sludge, trash-laden water, and soft solids without clogging or choking. Run on compressed air; no additional fuel or electrical connections necessary. Self-draining to prevent damage in below-freezing weather. With continuous automatic lubricating internal oiler, and oil-batch-lubricated shaft seal.

Discharge NPT

Max. Dia. Solids

Air Inlet Pressure (PSI) Base Material

Housing Material

Impeller Material

GPM of Water @ 5 ft. of Head

GPM of Water @ 15 ft. of Head

GPM of Water @ 30 ft. of Head

GPM of Water @ 50 ft. of Head Max. Head

Item

No. 3 in F 1 1⁄2" 80 Aluminum Aluminum Cast Iron 300 240 150 25 64.7 ft WWG6WY64

SANDPIPER

Submersible Grinder Pumps

GGM3BB97

# CI = cast iron

Pump

HP

Switch

Type

Discharge

NPT Height Diameter Voltage Amps

Base Material

Pump

Body Material

Impeller Material

Max. Liquid Temp.

GPM of

Water @ 20 ft. of Head

GPM of

Water @ 40 ft. of Head

GPM of

Water @ 60 ft. of Head

GPM of Water @ 80

ft. of Head

Max Head

Max. Diameter

Solids

Cord Length

Item

No.

2 Tether 1 1⁄4 in F 20 53⁄64" 8 13⁄16" 240 VAC 15 A CI CI CI 77 Degrees F 57 57 54 40 100 ft — 20 ft. GGM3BB97

Tether 1 1⁄4 in F 20 53⁄64" 8 13⁄16" 460 VAC 4 A CI CI CI 77 Degrees F 57 57 54 40 100 ft 3 in 20 ft. GGM3BB98

DAYTON

Effluent Pumps

▪Max. temp.: 130°F ▪60 Hz AC motors ▪Nonclog vortex impeller with minimum 1⁄2" solids capacity Rugged enough for harsh environments and suitable for use in effluent, greywater treatment facilities, high-head dewatering, septic tanks, and water transfer in commercial, industrial, and residential applications. Cast-iron construction helps dissipate heat while the oil-filled motors provide additional heat dissipation, are hermetically-sealed, and permanently lubricated. Baked-on epoxy finish resists corrosion. Single-phase models feature internal thermal protection. All models are factory tested underwater for reliability.

WWG4NW19 WWG4NW04

HP Switch Type Phase

Discharge

NPT Height Diameter Base Material

Impeller Material

GPM of Water @ 5 ft. of Head

GPM of Water @ 15

ft. of Head

Max Head

Max. Diameter

Solids Amps Cord Length Brand

Item

No. Stainless Steel

1⁄3 Tether Single 2 in 16 3⁄4" 6 1⁄2" Stainless Steel Stainless Steel 85 59.5 28 ft 1 1⁄2 in 9.16 20 ft. Dayton GGM4HDZ8 4⁄10 Tether Single 2 in 16 3⁄4" 6 1⁄2" Stainless Steel Stainless Steel 85 63 32 ft 1 1⁄2 in 11.00 20 ft. Dayton GGM2JGA2 Cast Iron

1⁄2 No Switch Included Single 1 1⁄2 in 19 5⁄16" 12 3⁄4" Cast Iron Bronze 100 85 56 ft 3⁄4 in 15.50 20 ft. Zoeller WWG4NW04 1 Tether Single 2 in 16 3⁄4" 12 3⁄16" Cast Iron Polypropylene 86 83 109 ft 3⁄4 in 8.30 20 ft. Dayton GGM3BB85 1 No Switch Included Three 2 in 16 3⁄4" 12 3⁄16" Cast Iron Polypropylene 86 83 109 ft 3⁄4 in 5.60 20 ft. Dayton GGM3BB86 2 No Switch Included Three 1 1⁄2 in 18 9⁄16" 12 3⁄4" Cast Iron Bronze 145 133 110 ft 3⁄4 in 6.00 20 ft. Zoeller WWG4NW19 2 No Switch Included Single 1 1⁄2 in 19 5⁄16" 12 3⁄4" Cast Iron Cast Iron 45 45 137 ft 5⁄8 in 14.50 20 ft. Zoeller WWG4NW20

DAYTON, ZOELLER