AMC 2026 catalogue

Pumps

Utility and Centrifugal Pumps

Need a price? Log in or register at Grainger.ca 1638

PUMPS

12V Shower Drain System and Bilge Pumps Efficient compact pumps have run-dry capability. Plastic housing. Use in fresh or salt water.

WWG3P998 WWG2GWK6

Voltage For Use With Wire Gauge

Item

No. Float Switch

12 to 24 Mfr. No. 12, 24, 25D, 10 16 WWG2GWK5 12 to 24 to 32 Mfr. No. 14 A, 56D,17A 14 WWG2GWK6

Hose Outlet (in.)

GPM of Water @ 0 ft. of Head

Max. Head (ft.) Length (in.) Height (in.) Width (in.)

Item

No. Electric Bilge Pump

1 1⁄8

25.0 10.2 4 1⁄4 6 4 1⁄4 WWG4NX11 33.3 16.0 4 7⁄8 6 4 1⁄4 WWG4NX12 33.3 20.0 2 7⁄8 7 3⁄4 4 3⁄4 WWG4P014 33.3 20.0 4 1⁄4 6 4 1⁄4 WWG3P998 1 1⁄2 61.7 23.5 4 7⁄8 7 1⁄4 4 7⁄8 WWG3P999 2 66.7 26.5 2 7⁄8 7 3⁄4 4 7⁄8 WWG4P012 Pump

1 1⁄2 63.3 25.0 2 7⁄8 5 1⁄4 5 3⁄4 WWG4P016

RULE

Pond Fountain Pump Systems Pumps operate in a minimum of 5 ft. of water and draw water from below the pond surface; a 6" PVC screen filters mosquitoes, algae, and other vegetation to improve aeration and extend motor life. All parts are plastic and stainless steel for maximum corrosion resistance. Include foam-filled flotation system and 3 nozzles for different fountain patterns. 100-ft. cord. Preassembled for simple installation.

HP Voltage

Full Load Amps Includes Spray Pattern

Max. Spray Width

Max. Spray Height Length Height

Item

No.

1⁄2 115 12 (3) Nozzle

Spray Patterns

(3) Spray Patterns

Sky Cannon 15 ft High, Trumpet 13 ft High, Water Lily 15 ft

30 ft. 15 ft 14 1⁄2" 32" WWG2VJ23

DAYTON

Self-Priming Thermoplastic Pumps

▪Max. operating temp.: 140°F ▪Max. suction lift: 20 ft. ▪Heavy-duty TEFC, 3450 rpm motors Fiberglass-reinforced pump bodies are specially fitted to resist seawater and saltwater. Durable and corrosion-resistant with stainless steel fasteners, inserts, and shafts. 1-phase pumps have built-in thermal overload protection.

HP Voltage Amps Phase Inlet Size Outlet Size

Best Efficiency GPM @ Head

Max. Head

Item

No. 1⁄2 208 - 240/480 VAC

3.6-3.2/1.6 Three 2 in NPT 1 1⁄2 in NPT 35 @ 46 ft. 64 ft. GGM5UPW4 3⁄4 5.2-5.0/2.5 Three 2 in NPT 1 1⁄2 in NPT 32 @ 60 ft. 97 ft. GGM5UPW5 2 9.0-8.8/4.4 Three 2 in NPT 2 in NPT 50 @ 70 ft. 134 ft. GGM5UPW8 3 11.2-10.6/5.3 Three 2 in NPT 2 in NPT 55 @ 90 ft. 141 ft. GGM5UPW9

DAYTON

General Utility Pumps

▪Cast-iron housing ▪Mechanical seal with carbon, ceramic, and nitrile parts ▪Max. liquid temp.: 180°F ▪Max. viscosity: 20,000cP Compact pumps have a rugged design for pulsation-free transfer of slurries and fluids. Models feature a rubber stator for quieter operation. You can easily calibrate the pump since flow is consistent and proportionate to the pump speed. Allow suction lifts up to 26 ft. Ideal for transferring abrasive slurries, coatings, feed additives, industrial waste, lubricants, and swimming pool water.

WWG30EK53

Min. RPM Max. RPM

Required HP @ Higher RPM Voltage

Flow Rate @ Min.

RPM and 0 PSI

Flow Rate @ Max.

RPM and 0 PSI Inlet/Outlet (In.) Length (in.) Width (in.) Height (in.)

Item

No.

150 1,750 1⁄2 Non-Motorized 0.835 gpm 9.4 gpm 3⁄4 NPT, 3⁄4 NPT 12 5⁄8 4 3⁄4 5 1⁄8 WWG30EK51 1,750 1⁄2 Non-Motorized 1.483 gpm 15.0 gpm 3⁄4 NPT, 3⁄4 NPT 12 5⁄8 4 3⁄4 5 1⁄8 WWG30EK52 1,750 1 1⁄4 Non-Motorized 2.139 gpm 24.0 gpm 1 1⁄2 NPT, 1 1⁄4 NPT 17 1⁄2 7 9⁄16 8 1⁄16 WWG30EK53

MOYNO

GGM5UPW4

Straight Center-Discharge Pumps

▪Max. case pressure: 75 psi ▪TEFC motors (No. WWG4XW69 is ODP) ▪3-phase units do not have overload protection and

require a pump control box, sold separately. Continuous-duty motors and drain plugs.

WWG4XW79 WWG4UB54

HP Amps Phase Inlet Size Outlet Size

Max. Liquid Temp.

Best Efficiency Range GPM @ Head Max. Head Impeller Material Brand

Item

No. Cast Iron

1 1⁄2 19.9/9.95 1 1 1⁄4 in NPT 1 in NPT 225°F 30 to 56 gpm @ 105 to 62 ft 118 ft. Brass Dayton WWG4RU75 2 10.0 1 1 1⁄4 in NPT 1 in NPT 212°F 32 to 50 gpm @ 122 to 90 ft 142 ft. Stainless Steel Goulds Water Technology WWG3CCT3 Stainless Steel

1⁄2 2.7-2.6/1.3 3 1 1⁄4 in NPT 1 in NPT 250°F 16 to 39 gpm @ 67 to 38 ft 62 ft. Stainless Steel Goulds Water Technology WWG4UB54 1 15.2/7.6 1 1 1⁄4 in NPT 1 in NPT 250°F 19 to 45 gpm @ 101 to 62 ft 114 ft. Stainless Steel Goulds Water Technology WWG4UB64 1 1⁄2 14.4/8.7 1 1 1⁄4 in NPT 1 in NPT 250°F 21 to 46 gpm @ 119 to 80 ft 136 ft. Stainless Steel Goulds Water Technology WWG4UB68 Cast Iron

1⁄2 10.2/5.1 1 1 1⁄4 in NPT 1 in NPT 212°F 18 to 40 gpm @ 62 to 35 ft 71 ft. Stainless Steel Goulds Water Technology WWG4XW69

3⁄4 12.2/6.1 1 1 1⁄4 in NPT 1 in NPT 212°F 18 to 42 gpm @ 75 to 42 ft 84 ft. Stainless Steel Goulds Water Technology WWG4XW75 2.7-2.6/1.3 3 1 1⁄4 in NPT 1 in NPT 212°F 18 to 42 gpm @ 75 to 42 ft 71 ft. Stainless Steel Goulds Water Technology WWG4XW76 1 15.2/7.6 1 1 1⁄4 in NPT 1 in NPT 212°F 22 to 45 gpm @ 90 to 55 ft 102 ft. Stainless Steel Goulds Water Technology WWG4XW79

DAYTON, GOULDS WATER TECHNOLOGY