AMC 2026 catalogue

Power Transmission

DC Gearmotors and Speed Reducers

Need a price? Log in or register at Grainger.ca 36

POWER TRANSMISSION

90VDC Permanent-Magnet Hollow-Shaft Right-Angle Gearmotors

▪Enclosure: totally enclosed nonventilated ▪Gearcase: die-cast aluminum ▪Lubrication: permanent, heavy fluid gear oil ▪Gears: worm-hardened steel, output gear bronze alloy ▪Bearings: oversized ball ▪Mounting: all-position ▪Rotation: reversible ▪Brushes: externally replaceable ▪Ambient: 40°C ▪Reversible shaft output ▪Seals: lip-type on input and output shafts

DTN3XA77

Nameplate

RPM Max. Torque

Overhung

Load Input HP

Gear Ratio

Full Load Amps

Item

No. 30 94 in-lbs 175 lbs. 1⁄8 60:1 1.28 DTN3XA82 40 82 in-lbs 175 lbs. 1⁄8 45:1 1.28 DTN3XA81

60 120 in-lbs 175 lbs. 1⁄4 30:1 2.33 DTN3XA86 60 in-lbs 175 lbs. 1⁄8 30:1 1.28 DTN3XA80

90 49 in-lbs 175 lbs. 1⁄8 20:1 1.28 DTN3XA79 100 in-lbs 175 lbs. 1⁄4 20:1 2.33 DTN3XA85

180 55 in-lbs 175 lbs. 1⁄4 10:1 2.33 DTN3XA84 27 in-lbs 175 lbs. 1⁄8 10:1 1.28 DTN3XA78

360 14 in-lbs 175 lbs. 1⁄8 5:1 1.28 DTN3XA77 30 in-lbs 175 lbs. 1⁄4 5:1 2.33 DTN3XA83

DAYTON

90VDC Permanent-Magnet Right-Angle Gearmotors

▪Enclosure: totally enclosed nonventilated ▪Gearcase: die-cast zinc ▪Lubrication: grease packed ▪Gears: input gear steel; worm hardened steel; output gear cast iron ▪Bearings: bronze sleeve on case, ball on motor ▪Mounting: all-position, base ▪Rotation: reversible ▪Thermal protection: none ▪Brushes: externally replaceable ▪Ambient: 40°C ▪Seals: on output shaft

Nameplate

RPM Max. Torque

Overhung

Load Input HP Gear Ratio

Full Load Amps

Item

No. 3 250 in-lbs 100 lbs. 1/20 525:1 0.59 DTN1LRA8 10 228 in-lbs 100 lbs. 1/20 161:1 0.59 DTN1LRB1 24 102 in-lbs 100 lbs. 1/20 70:1 0.59 DTN1LRB2 45 56 in-lbs 100 lbs. 1/12 37:1 0.59 DTN1LRB4 90 34 in-lbs 100 lbs. 1/10 37:1 1.14 DTN1LRB3

DAYTON

▪UL and C-UL Recognized ▪1⁄8-HP units accept direct motor-mount speed

control No. DTN2PUX3 (sold separately) ▪Accept pulse generator Nos. WWG6Z392

or WWG5JJ65 (sold separately)

C-Face Right-Angle Speed Reducers

▪29 to 173 output rpm, standard duty ▪Double-output shaft ▪Horizontal floor or ceiling mount ▪2.63" worm center distance ▪Shipped with Klubersynth UH1 6-460 gear oil ▪Ball bearings

* @ 1725 rpm.

Nominal Output RPM* Overhung Load Nominal Ratio Max. Input HP Max. Output Torque

Item

No. 35 986 lb. 50:1 0.5 498 in.-lb. WWG2Z151 43 870 lb. 40:1 0.5 431 in.-lb. WWG6Z129 69 679 lb. 25:1 0.75 492 in.-lb. WWG2Z152 86 629 lb. 20:1 0.75 422 in.-lb. DMD2Z153 138 487 lb. 12.5:1 0.75 292 in.-lb. WWG2Z154 173 432 lb. 10:1 0.75 226 in.-lb. DTN2Z936

DAYTON

For use with 1⁄4 to 3⁄4 HP, NEMA 56C, 1725 rpm motors. Case-hardened, ball bearing-supported worm. High-strength bronze, tapered roller bearing-supported output gear. Cast-iron housing. For C-face motors, see Motors section.

▪Gear limited ▪UL and C-UL Recognized ▪Units are compatible with speed

control No. DTN2PUX3

9.83 MAX

DTN1LRA8

WWG2Z151