AMC 2026 catalogue

HVAC & Refrigeration

Compact Axial Fans and Accessories

Find even MORE at Grainger.ca 1847

1-888-602-0000 HVAC & REFRIGERATION

Axial Fan Accessories

Fan Guards—Steel guards are nickel chrome-plated.

Replacement Media—For plastic fan filter guard assemblies. Filters with 30 pores/inch remove dust and contaminating particles; 45 pores/inch media is for heavy dust conditions.

Cord Sets—Type SPT-1, 18/2 AWG (Nos. GGE3RP10 to GGS3RP14) plugs into terminals of all standard 115 or 230V axial fans. 72" cord has NEMA wall plug on opposite end. Type SPT-1, 18/3 AWG (No. GGE4YD81), plugs onto terminals of all standard 115V axial fans. Cord includes integral ground wire with ring terminal, available individually.

GGE31CC67

GGE4YD96

GGE4YD78

GGE3RP10

Item Voltage NEMA Plug Configuration Length (in.) Head Configuration

Item

No. Pkg. Qty. Cord Set With Wire Leads 115/230V AC Hardwire 24 45° GGE3RP10 1 Cord Set With Wire Leads 115/230V AC Hardwire 36 45° GGE3RP12 1 Cord Set With Wire Leads 115/230V AC Hardwire 24 90° GGE4YD79 1 Cord Set With Wire Leads 115/230V AC Hardwire 24 45° WWG4YD80 100 Cord Set With Plug 115V AC 1-15P 72 45° GGS3RP14 1 Cord Set With Plug 115V AC 5-15P with Ground Lead 72 90° GGE4YD81 1

For Fan Size (in.) Material PPI Rating Mounting Eye O.C. (in.) Depth (in.)

Item

No. Pkg. Qty. Compact Axial Fan Filter and Guard Assembly

2 3⁄8 Plastic, Polyurethane 30 (4) 1 31⁄32 1⁄4 GGE31CC58 1 3 1⁄8 Plastic, Polyurethane 30 (4) 2 13⁄16 3⁄8 GGE31CC63 1 6 3⁄4 Plastic, Polyurethane 30 (2) 6 3⁄8 3⁄8 GGE3RP16 1 Compact Axial Fan Guard

2 3⁄8 Steel — (4) 1 31⁄32 11⁄64 GGE3RP19 1 3 1⁄8 Steel — (4) 2 13⁄16 13⁄64 GGE4YD96 1 3 1⁄8 Plastic — (4) 2 13⁄16 1⁄4 GGE31CC60 1 3 5⁄8 Steel — (4) 3 1⁄4 11⁄64 GGE2RTA5 1 3 5⁄8 Plastic — (4) 3 1⁄4 9⁄32 GGE31CC67 1 4 11⁄16 Steel — (4) 4 1⁄8 7⁄32 GGE4YD87 1 4 11⁄16 Plastic — (4) 4 1⁄8 5⁄16 GGE31CC64 1 6 3⁄4 Plastic — (2) 6 3⁄8 3⁄8 GGE3RP15 1 6 3⁄4 Steel — (2) 6 3⁄8 1⁄4 GGE4YD91 1 10 Steel — (4) 6 7⁄8 1⁄4 GGE4YD82 1 EMF Compact Axial Fan Guard

4 11⁄16 Aluminium — (4) 4 1⁄8 11⁄64 GGE4YD78 1 Replacement Compact Axial Fan Filter Media

3 1⁄8 Polyurethane Foam, UL94HF-1 30 — 1⁄8 GGE31CC59 5 4 11⁄16 Polyurethane Foam, UL94HF-1 30 — 1⁄8 GGE31CC62 5 4 11⁄16 Polyurethane Foam, UL94HF-1 45 — 1⁄8 GGE31CC65 5 6 3⁄4 Polyurethane Foam, UL94HF-1 45 — — GGE4YD90 1

DAYTON

Compact Axial Fan

▪All-position mounting ▪Ball bearings Compact, low-profile fan is suitable for areas where a high volume of air must be displaced against low to medium resistance. DC unit is fully speed controllable and reverse polarity protected. For IP68 (Ingress Protection Waterproof and Dust Proof) Axial Fans, see Grainger.ca using keywords “axial ip68”.

Square DC—Features economical brushless motor for long life, and electronically-commutated drive with electronic protection against reverse polarity. Many DC fans can be operated on voltages up to 50% lower and 25% higher than their nominal voltage (see Voltage in table). This enables the air performance to be adapted to the cooling requirements.

Fan Height Fan Width Fan Depth

Mounting

Eye O.C.

CFM @ 0.000" SP Fan Voltage Amps Watts

Electrical Connection Fan dBA Bearings

Housing Material

Item

No. Square 24V DC

2 21⁄64" 2 21⁄64" 1" 2 in 33 cfm 24 VDC 0.15 A 3.6 Lead Wires 43 Ball

Fibreglass Reinforced

Plastic

WWG5AFZ4

EBM-PAPST