AMC 2026 catalogue

Abrasives

Sanding Discs and Cut-Off Wheels

Need a price? Log in or register at Grainger.ca 1378

ABRASIVES

NRN96557 NRN20546

NRN09585

Sanding Discs and Depressed Center Wheels An open web of synthetic fibers and abrasive bond with smear-resistant resin help these wheels provide quick cleaning and conditioning without loading; easily clean uneven surfaces and difficult part profiles. Use to remove surface rust and residue, corrosion, light weld splatter, dirt, mill scale, paint, and epoxy. Prepare surfaces prior to welding or coating applica- tion. Clean and condition after welding. Blaze Rapid Strip Series wheel can strip coatings and finish with the same disc. Rapid Strip Series discs and wheels have a coarse abrasive for quick cleaning. Rapid Blend Series discs and wheels have fine grain particles for cleaning, polishing, and final finishing.

Abrasive Wheel Type

Abrasive Wheel Diameter Thickness Arbor Hole Size Abrasive Material Grit Max. RPM Series

Item

No. Non-Woven Depressed Centre Disc

Type 27

4 1⁄2 in 1⁄2" 5⁄8"-11 Silicon Carbide 24-36 12,000 Rapid Strip NRN09585 7 in 1⁄2" 7⁄8" Silicon Carbide 24-36 8,000 Rapid Strip NRN09586 4 1⁄2 in 1⁄2" 7⁄8" Silicon Carbide 24-36 12,000 Rapid Strip NRN09649 4 1⁄2 in 1⁄2" 7⁄8" Silicon Carbide 320 - 400 12,000 Rapid Blend NEX NRN20546 4 1⁄2 in 1⁄2" 5⁄8"-11 Silicon Carbide 320 - 400 12,000 Rapid Blend NEX NRN23943 4 1⁄2 in 1⁄2" 5⁄8"-11 Aluminum Oxide 150 - 180 12,000 Rapid Blend NEX NRN23947 4 1⁄2 in 1⁄2" 5⁄8"-11 Aluminum Oxide 150 - 180 12,000 Rapid Blend NRN23949

Abrasive Type

Disc Attachment

System Disc Attachment Type Disc Diameter Abrasive Grade Abrasive Material Max. RPM Series

Item

No. Surface Conditioning Disc

Non-Woven TR Roll-On/Off Type 3 3" Extra Coarse Ceramic 12,000 Blaze Rapid Strip NRN96557

NORTON

Cut-Off Wheel Adapters

Note: Operate according to ANSI and OSHA guidelines and do not exceed maximum rpm noted on wheel being used.

Screw-Type Wheel Mandrel Adapters—Machined from stressproof steel. Screw head is slotted for fast, easy change. Plated finish. No. 1F540 comes with screws to mount either 1⁄4" or 3⁄8" holes.

Nut-Type Wheel Arbor Adapters—Use to mount all types of wheels (cut-offs, cloth buffs, wire wheels, etc.). Include arbor, hex nut, and a pair of machined steel washers. Plated finish.

WWG1F450

* Washer O.D. indicates diameter of screw and mandrel head (no washer).

Fits Hole (in.)

Max. Wheel

Width (in.)

Shank Dia. (in.)

Washer O.D. (in.) Length (in.)

Item

No. Screw Lock-Type Wheel Adapter

1⁄4 1⁄4 1⁄4 3⁄4 2 WWG1F544 * 1⁄4 or 3⁄8 1⁄4 1⁄4 3⁄4 2 1⁄8 WWG1F540 3⁄8 1⁄4 1⁄4 3⁄4 2 WWG1F542 * Nut Lock-Type Wheel Adapter

3⁄8 5⁄8 1⁄4 1 2 1⁄2 WWG1F450

APPROVED VENDOR

KLS187171

46 Grit Cut-Off Wheels Klingspor's A46TZ small diameter, ultra thin, High Performance cut-off wheels offer rapid cut rate on a variety of metals. For portable cut-off with right angle grinders or other portable cut-off equipment. 1⁄16" thickness. 7⁄8" arbor hole. Aluminum Oxide abrasive material.

Grit

Abrasive Wheel Diameter Max. RPM Series

Item

No.

46 5 in 12,200 Special KLS187171 7 in 8,500 Special KLS221161

KLINGSPOR

WLT11L007

Mandrels – Flush Mounting

Description

Item

No. For 2" and 3" Wheels with 1⁄4" and 3⁄8" Arbor, Up to 1⁄8" Thick, 1⁄4" Shaft WLT11L007 For 2" Wheels with 5⁄16" Arbor, Up to 1⁄8" Thick, 1⁄4" Shaft WLT11L001 For 3" and 4" Wheels with 3⁄8" Arbor, Up to 1⁄8" Thick, 1⁄4" Shaft WLT11L003 For 3" and 4" Wheels with 1⁄4" Arbor, Up to 1⁄8" Thick, 1⁄4" Shaft WLT11L006

WALTER SURFACE TECHNOLOGIES