AMC 2026 catalogue

Test Instruments

Resistance & Transformer Testers

Find even MORE at Grainger.ca 163

1-888-602-0000 TEST INSTRUMENTS

Earth/Ground Resistance Testers

Earth Ground Tester Kit—Overrange and low battery indication, auto zero, data hold, auto-off, and overload protection. Includes protective rubber holster, 2 auxiliary earth bars, and test leads.

Ground Resistance Range Accuracy Resolution Operating Frequency Power Source Display Safety Rating

Item

No. Earth Ground Tester

0.002/0.02/0.2/2 kilohm ±2% of Reading ±3 Digits 0.001 to 1 kΩ 820 Hz (8) 1.5V AA Batteries Dual Line LCD CAT IV 300V EXTGRT300 Earth Ground Tester Kit

0.02/0.2/2 kilohm ±0.8% of Reading ±3 Digits 0.01 Ω 820 Hz (6) 1.5 V AA Batteries Digital LCD CAT III 1,000V EXT382252

EXTECH

Earth/Ground Tester Kits Provide frontline troubleshooting and in-depth soil analysis—a complete solution for utilities, electrical contractors, industrial facilities, telecom, and data centers. Each includes required connections, leads, and hard case. Genuine Fluke® accessories are available; on Grainger.ca, search for "earth ground tester acc".

Testers are designed with 3- and 4-pole fall of potential and 4-pole soil resistivity testing. Each instrument features selective earth ground rod testing using 1 clamp and stakeless earth ground rod testing using 2 clamps. Kits include 4 stakes, 3 wire spools, 2 clamps, and cables.

FET1623-2KIT

Earth Measurement Poles Measuring Voltage Operating Frequency Earth Measurement Clamps Soil Resistivity

Mfr. Model

Item

No. Earth Ground Tester Kit

3, 4 Less Than 48 128 Hz Selective, Stakeless Yes FLUKE-1623-2 KIT FET1623-2KIT 2, 3, 4 (AC), 2, 4 (DC) Less Than 20 94/105/111/128 Hz Selective, Stakeless Yes FLUKE-1625-2 KIT FET1625-2KIT Earth Ground Tester

3, 4 Less Than 48 128 Hz No Yes FLUKE-1623-2 FETFLK1623-2 2, 3, 4 (AC), 2, 4 (DC) Less Than 20 94/105/111/128 Hz No Yes FLUKE-1625-2 FET1625-2

FLUKE

Vibration Meters & Accessories

Measure the amount of vibration in items such as motors and bearings. These vibration testers make machine condition evaluation fast and simple for frontline technicians by providing onboard identification and severity of the most common mechanical faults: bearing impacting, shaft misalignment, looseness, and unbalance.

Item

Temp. Range (C)

Temp. Range (F) Frequency Range (Hz) Velocity

Acceleration

Range Includes Special Features

Item

No. Nonelectrical Properties Testing

Vibration

Meter -20° - 200° -4° to 122° F 10 to 20 k in/sec, mm/sec 0 to 50g Carry Case, Belt Holster, Quick Start Guide, (2) AA

Lithium-Iron Disulfide

Batteries, USB Cable

4-Level Severity Scale for Machine Health (Low-Frequency) and Also for Bearing Health (High-Frequency), Non- Contact IR Thermometer

From -20 to 200° C

FET805FC

Vibration Tester Sensor — —

Z-Axis 2 to 7,000 Hz ±3 dB, X-Axis 2 to 5,000 Hz ±3 dB,

Y-Axis 2 to 5,000 Hz ±3 dB

— 80 g Peak Warning Sheet — FETFE810S

Smart Battery

Pack — — — — — — — FETFESBP810

Vibration

Tester 0° to 50° C 32° to 122° F 2 Hz to 20 kHz No 0 to 80g Peak

Tri-Axial TEDS 1451.4 Compatible Accelerometer, Accelerometer Accessories, Laser Tachometer and Storage

Pouch, Battery Pack with Charger, Shoulder Strap, Hand Strap, Software, USB Interface Cable, Hard Carrying

Case and Instructions

Diagnose the Most Common Faults On Most

Standard Machines

FETFLUKE810

FLUKE

EXT382252 EXTGRT300