AMC 2026 catalogue

Plumbing

Tubing & Accessories

Find even MORE at Grainger.ca 1677

1-888-602-0000 PLUMBING

Tubing Racks Securely mount and route multiple tube runs with this rack. It allows easy visual tracking and can be used with most poly and plastic tubing.

WWG2HAA9

No. of Channels

Outside Dia.

Tubing (in.) Overall Length (in.)

Item

No. 7 3⁄8 in 4.4 in WWG2HAC2 10 5⁄32 in 4 in WWG2HAA9 10 1⁄4 in 4 in WWG2HAC1

APPROVED VENDOR

Schedule 40 Polypropylene Pipe

▪Max. temp.: 200°F. Fire-retardant Proxylene thermoplastic construction, with excellent resistance to most common organic and mineral acids and their salts, strong and weak alkalies, and most organic chemicals. Use with Orion Acid Waste fittings. Meet ATSM D 2657.

Pipe Size Overall Pipe Length

Item

No. 1 1⁄2 in 10 ft WWG3RCZ3 2 in 10 ft WWG3RCZ4

ORION

Tygon® F-4040-A Fuel and Lubricant Tubing

▪Max. temp.: 165°F ▪Hardness: Shore A57 ▪Yellow color ▪50-ft. length Handles most fuels and industrial lubricants; resists hardening and swelling caused by hydrocarbon-based fluids. Tubing is highly flexible and easy to install.

Inside Dia. Outside Dia. Max. Pressure

Item

No. 1⁄8 in 1⁄4 in 50 psi WWG12X202

TYGON

Polyurethane Tubing

▪Temp. range: -5° to 160°F ▪100-ft. overall length Polyvinyl-chloride braided hose is manufactured from F.D.A. approved resins. Open mesh nylon braid withstands higher pressures. Transparent (blockages can be easily detected), flexible, light, and non conductive. Suitable for use with air, mineral salts, planting solutions, water, salt water and hydrocarbons.

Note: Working pressure decreases as temp. increases.

Inside Dia. Outside Dia. Max. Pressure Tube Colour

Item

No. 1⁄4" 0.46" 250 PSI Clear FARPVC84-100 1⁄2" 0.75" 200 Clear FARPVC128-100P 3⁄4" 1.025" 150 Clear FARPVC1712-100P 1" 1.312" 125 PSI Clear FARPVC2116-100 2" 2.5" 75 PSI Clear FARPVC4032-100

FAIRVIEW

Polyurethane Tubing

▪Temp. range: -68° to 140°F ▪Hardness: Shore A98 Strong, flexible tubing is 5 to 10 times more wear- and abrasion-resistant than rubber hose, and lighter weight. Use with push-to-connect fittings with no tube support. Nonmarking; resist algae growth. For air and water lines, robotics, carwash, and painting equipment.

Note: Working pressure decreases as temp. increases.

Inside Dia. Outside Dia. Max. Pressure Tube Length

Item

No. 2.5 mm 4 mm 200 psi 100 ft WWG1PBR3

APPROVED VENDOR

Polyethylene Tubing

▪Temp. range: -50° to 140°F ▪Tube Hardness: Shore D: 55 Resists stress cracking caused by chemicals, soaps, solvents, and oils. For food processing, pneumatic, water line, drain line, laboratory, and process control plant applications. FDA Approved.

Inside Dia. Outside Dia. Wall Thickness Max. Pressure Tube Length

Item

No. 5⁄32 in 1⁄4 in 0.04 in 150 psi 1,000 ft WWG4HM14

APPROVED VENDOR

Polyethylene Tubing Polyethylene tubing is manufactured from F.D.A. approved resins. Low moisture absorption, fungus resistant, non-corrosive and highly resistant to stress crack. Suitable for air and water applications and is used for beverage and soda transfer. Low density provides flexibility. High density is not as flexible, but provides a higher temperature and pressure rating. Note: The working pressures listed for the poly tubing are rated at 70° F, 21° C. Any ambient or internal increase in temperature will lower the listed working pressures. These tubings are not recommended for milk contact.

Outside

Dia.

Inside

Dia.

Wall Thickness

Max. Pressure Temp. Range

Item

No. Low Density

5⁄16" 0.187" 0.062 in — -40 Degrees F - 160 Degrees F FAR360-5-100 5⁄8" 0.5" 0.062 in — -40 Degrees F - 160 Degrees F FAR360-10-100 3⁄4" 0.625" 0.062 in — -40 Degrees F - 160 Degrees F FAR360-12-100 High Density

1⁄4" 0.17" 0.04 in 250 -40°F - 250°F FAR359-4-100P 1⁄2" 0.375" 0.062 in 250 -40°F - 250°F FAR359-8-100P Low Density

1⁄4" 0.17" 0.04 in 125 -40°F - 160°F FAR360-4-100P 3⁄8" 0.25" 0.062 in 100 -40°F - 160°F FAR360-6-100P 1⁄2" 0.375" 0.062 in 90 -40°F - 160°F FAR360-8-100P

FAIRVIEW