AMC 2026 catalogue

Pumps

Diaphragm Pumps

Need a price? Log in or register at Grainger.ca 1662

PUMPS

Electric-Operated Diaphragm Pumps

▪Polypropylene housing ▪Sealed motor with run-dry capability

12VDC, Water Based—Permanent magnet ball- bearing motors.

Automatic Demand Pumps—Max. water temp.: 160°F. Meet U.S. Coast Guard (USCG) electrical standards.

Complete Water System—Includes pump and precharged 1-gal. pressurized bladder tank with air valve. FDA-approved materials.

Water System Pump with Valve—Features quick-disconnect plug-in ports, built-in bypass valve, and pressure switch.

12VDC, Petroleum Based—Suitable for liquid transfer, dewatering circulation, oil changing (warm), and diesel fuel transfer. Meet USCG, ISO 8846 for diesel fuel transfer.

115VAC, Water and and Petroleum Based— Sealed pressure demand switch. UL Listed, UL Recognized, CSA Certified. WWG4YD54

Inlet/Outlet Flow

Pressure

On

Pressure

Off

Max. Pressure

Diaphragm

Material

Item

No. Booster Pump System

3⁄4" HB 4.5 gpm 30 40 40 PSI Santoprene WWG4YD37 Diaphragm Pump

3⁄8" FNPT 2 gpm 40 60 60 PSI FKM WWG2XE91

3⁄8" FNPT 2 gpm 40 60 60 PSI Ethylene Propylene WWG2XE94

3⁄8" — — — 35 PSI Santoprene WWG10H916 3⁄8" FNPT 2 gpm 80 100 100 PSI EPDM WWG2XE92

Inlet/Outlet Flow

Pressure

On

Pressure

Off

Max. Pressure

Diaphragm

Material

Item

No. 3⁄8" FNPT 2 gpm 40 60 60 PSI Buna-N WWG2XE93 1⁄2" HB 3.5 gpm 30 45 45 PSI EPDM WWG4YD41 Electric Sprayer Pump

3⁄8" HB 1 gpm 25 35 35 PSI Santoprene WWG4YD54 1⁄2" HB 3.3 gpm 25 35 35 PSI Santoprene WWG4YD43 Washdown Pump

3⁄4" 4.5 gpm 30 40 40 PSI Santoprene WWG4YD42

FLOJET

Evaporative Cooler Pump

▪Max. temp.: 200°F ▪Max. viscosity: 500 SSU ▪1725 rpm TEFC motors ▪Brass pump body, bronze impeller Used in evaporative coolers, displays, laboratories, and similar water transfer applications.

HP Voltage

Motor

Type

Cord

(ft.)

Inlet/ Outlet (In.)

GPM of Water @ 1 ft. of Head

GPM of Water @ 3 ft. of Head

GPM of Water @ 5 ft. of Head

Shut- Off (ft.)

Length

(in.)

Height

(in.)

Max. Immersion Depth (in.)

Item

No.

1⁄25 115 V Capacitor-

Start/Run 3 3⁄8 7.1 6.6 5.5 7.8 5 1⁄4 12 3⁄8" 6 WWG4JPG4

DAYTON

Non-Metallic Air-Operated Diaphragm Pumps

▪Variable flow ▪“Unstallable” design. ▪Always check chemical compatibility. ▪No-stall air motor design. ▪Self-priming 15 ft. wet, 10 ft. dry. ▪Maximum temperature 150° F.

AROPD03P-APS-PCC

Description Diaphragm Material Ratio Air Inlet Size (in.) Typical Fluids

Item

No. 3⁄8" Fluid Ports NPT(F) 10.6 GPM (40.1 Liters) Hytrel 1:1 1⁄4 (F) ATF, Engine Oil, HTD Oil AROPD03P-APS-PCC 1⁄2" Fluid Ports NPT(F) 14.4 GPM (54.4 Liters) Teflon 1:1 1⁄4 (F) Acids, Oils, Solvents AROPD05P-APS-PTT-B

INGERSOLL RAND

Polypropylene pumps (Polypro) pumps offer wide material compatibility (acids, alkalis, stabilizers, aliphatic solutions, polar substances, etc.), high fatigue endurance and superior abrasion resistance. Flow rate depends on air pressure and fluid viscosity. Maximum flow rates are achieved at 100 PSI for 1⁄4" and 1⁄2" pumps, and 120 pSI for other size pumps. Verify materials of construction and chemical compatibility before using. Teflon Diaphragms Good for all media except for those containing highly abrasive materials.

Metallic Air-Operated Diaphragm Pumps

▪No-stall air motor design. ▪Self-priming 20 ft. dry (1"), 18 ft. dry (2"). ▪Temperature limitations determined by elastomer used; Teflon 220° F; Santoprene 225° F; Nitrile 180° F. Flow rate depends on air pressure and fluid viscosity. Maximum flow rates are achieved at 120 PSI. Verify materials of construction and chemical compatibility before using. Uses: pumping water, solvents, slurries, waste oils, paints, and adhesives compatible with pump component materials.

ARO66610A244C

Item Check Diaphragm Material Ratio Air Inlet Size (in.) Typical Fluids

Item

No. PUMP DIAPHRAM 1IN NITRILE/ALUM Nitrile Nitrile 1:1 1⁄4 (F) Oils, Inks, Water ARO66610A222C PUMP DIAPHRAM 1IN TEFLON/ALUM Teflon PTFE, Santoprene 1:1 1⁄4 (F) Oils, Solvents ARO66610A244C PUMP DIAPHRAM 1IN Hytrel Hytrel 1.1 1⁄4 (F) ATF, Engine Oil, HTD Oil ARO66610A2C9C PUMP DIAPHRAM 1-1/2IN Hytrel — 1:1 1⁄2 (F) ATF, Engine Oil, HTD Oil ARO66615O3C9C

INGERSOLL RAND