AMC 2026 catalogue

Pumps

Submersible Sump Pumps

Find even MORE at Grainger.ca 1627

1-888-602-0000 PUMPS

Pedestal Sump Pumps

▪Max. temp.: 200°F ▪115V, 60 Hz, continuous-duty motors with TEFC enclosure Commercial/Industrial Upright Sump Pumps feature an automatic float-type switch and double-shielded ball bearings at both ends.

GGM5URJ0

HP

Switch

Type

On Point

Off Point

Discharge

NPT Height Diameter Base Material

Impeller Material

GPM of Water @ 5 ft. of Head

GPM of Water @ 15

ft. of Head

Max Head

Max. Diameter

Solids Amps

Cord Length

Item

No. Cast Bronze

1⁄3 hp Vertical 11 in 4 in 1 1⁄2 in F 49" 11" Stainless Steel Stainless

Steel 54 30 20 ft 7⁄16 in 4.00 8 ft. GGM5URJ0

Cast Iron

1⁄2 hp Vertical 11 in 4 in 2 in F 43" 13" Steel Cast Iron 103 39 20 ft 3⁄4 in 6.00 8 ft. GGM5URJ5 Stainless Steel

1⁄2 hp Vertical 11 in 4 in 1 1⁄2 in F 55" 11" Stainless Steel Stainless

Steel 65 49 22 ft 7⁄16 in 5.00 8 ft. WWG5URJ4

DAYTON

Zoeller® Submersible Sump Pumps

▪Max. temp.: 130°F ▪115V, single phase (except Nos. WWG4NW37 and WWG5CZG4 are 230V) ▪Nonclog, vortex impellers Screenless suction inlet enables pumps to be used in areas with light debris accumulation, where conventional sump pumps would clog or freeze up. Designed for dewatering/sump applications. Feature dependable, hermetically-sealed and permanently lubricated motors for long life. Motors are oil-filled for added heat dissipation. Pumps have a baked-on epoxy finish for corrosion resistance. Factory tested underwater for reliability.

WWG5CZG5 WWG4NW36 WWG2P548 WWG2P547 WWG2P549

HP

Switch

Type Type On Point Off Point

Discharge

NPT

ok, Height Diameter Base Material

Impeller Material

GPM of Water @ 5 ft. of Head

GPM of

Water @ 15 ft. of Head

Max Head

Max. Diameter

Solids Amps

Cord Length

Item

No. Cast Bronze

3⁄10 Vertical Automatic 7 1⁄4 in 3 in 1 1⁄2 in F 10 1⁄16" 10 3⁄32" Polypropylene Polypropylene 43 19 19 ft 1⁄2 in 9.60 10 ft. WWG2P548 Cast Iron

3⁄10 No Switch

Included Manual — — 1 1⁄2 in F 10 1⁄16" 10 3⁄32" Cast Iron Cast Iron 43 19 19 ft 1⁄2 in 4.80 10 ft. WWG4NW37

3⁄10 No Switch

Included Manual — — 1 1⁄2 in F 10 1⁄16" 10 3⁄32" Cast Iron Cast Iron 43 19 19 ft 1⁄2 in 9.70 15 ft. WWG5CZG5

3⁄10 No Switch

Included Manual — — 1 1⁄2 in F 10 1⁄16" 10 3⁄32" Polypropylene Polypropylene 43 19 19 ft 1⁄2 in 9.70 10 ft. WWG4NW36

3⁄10 Vertical Automatic 7 1⁄4 in 3 in 1 1⁄2 in F 10 1⁄16" 10 3⁄32" Cast Iron Cast Iron 43 19 19 ft 1⁄2 in 9.60 10 ft. WWG2P549 3⁄10 Vertical Automatic 7 1⁄4 in 3 in 1 1⁄2 in F 10 1⁄16" 10 3⁄32" Polypropylene Polypropylene 43 19 19 ft 1⁄2 in 9.70 9 ft. WWG2P547

1⁄2 No Switch

Included Manual — — 1 1⁄2 in F 12" 10 1⁄8" Engineered Thermoplastic Polypropylene 72 45 23 ft 1⁄2 in 9.40 15 ft. WWG4NW38

1⁄2 Vertical Automatic 7 1⁄4 in 3 in 1 1⁄2 in F 12" 10 1⁄8" Engineered Thermoplastic Polypropylene 72 45 23 ft 1⁄2 in 9.40 15 ft. WWG2P550

1⁄2 Vertical Automatic 7 1⁄4 in 3 in 1 1⁄2 in F 12 1⁄16" 10 1⁄8" Engineered Thermoplastic Polypropylene 72 45 23 ft 1⁄2 in 4.70 15 ft. WWG5CZG4

ZOELLER

High-Temperature Submersible Pumps

▪120V

Notes: Basin material must be designed for the elevated temperatures anticipated. Continuous duty based on motor NEMA standards. Pump performance based upon room temperature; as temperature increases, performance will vary. Use in boiler blow-down pits, plant washdown sump pits, underground transformer vaults, and industrial cleaning sump pits.

HP Switch Type On Point Off Point

Discharge

NPT Height Diameter

Base Material

Impeller Material

GPM of Water @ 5 ft. of Head

GPM of Water @ 15

ft. of Head Max Head

Max. Diameter

Solids Amps Cord Length

Item

No. 1⁄2 Float 7 1⁄4 in 3 in 1 1⁄2 in F 13 1⁄2" 11" Cast Iron Cast Iron 66 41 21 ft 1⁄2 in 9.40 15 ft. WWG4P023

ZOELLER

No. WWG4P023—Is rated for constant 200°F. Viton® gaskets. 3-ft. flexible conduit to remove the switch assembly from the high- temp. operating level.