AMC 2026 catalogue

Power Transmission

AC Gearmotors

Need a price? Log in or register at Grainger.ca 30

POWER TRANSMISSION

115VAC Shaded Pole and Split-Phase Parallel-Shaft Gearmotors

▪Totally enclosed, fan-cooled ▪Gearcase: die-cast aluminum ▪Lubrication: permanent heavy-duty gear oil ▪Gears: hardened steel, 1st stage

helical, subsequent stages spur ▪Bearings: heavy-duty needle roller and

thrust ball bearings on case; ball on motor ▪Mounting: all-position

DTN3M326

Nameplate

RPM

Max. Torque

Overhung

Load Input HP Gear Ratio

Full Load Amps

Length Less Shaft

Item

No. Shaded Pole

4 200 in.- lbs. 175 lbs. 1/40 396:1 1.50 8 3⁄8" DTN3M326 14 200 in.- lbs. 175 lbs. 1/20 118:1 1.90 8 1⁄2" DTN3M328 30 126 in.- lbs. 175 lbs. 1/15 53:1 2.30 8 7⁄8" DTN3M329 70 55 in.- lbs. 175 lbs. 1/15 23:1 2.30 8 7⁄8" DTN3M330 Split-phase

14 200 in.- lbs. 175 lbs. 1/15 118:1 1.50 9 7⁄8" WWG2Z817 68 55 in.- lbs. 175 lbs. 1/15 23:1 1.50 9 7⁄8" WWG2Z818 100 38 in.- lbs. 175 lbs. 1/15 17:1 1.50 9 7⁄8" WWG2Z841

DAYTON

▪60 Hz ▪Rotation: clockwise facing output shaft on shaded

pole models; reversible on split-phase models ▪Thermal protection: none ▪Ambient: 40°C ▪Brake: adaptable to WWG5X400 (brake disk sold separately) ▪Shaded pole motors are UL Recognized; split-

phase motors are UL and C-UL Recognized

115VAC Split-Phase Parallel-Shaft Gearmotors

▪Enclosure: open dripproof ▪Gearcase: die-cast zinc ▪Lubrication: grease filled ▪Gears: cut steel

and phenolic ▪Bearings: porous

bronze sleeve on case; ball on motor ▪Mounting: all-position ▪60 Hz ▪Rotation: reversible ▪Thermal protection: none ▪Ambient: 40°C ▪UL and C-UL Recognized

Key

Nameplate

RPM

Max. Torque

Overhung

Load Gear Ratio

Full Load

Amps

Length Less Shaft

Item

No.

A

6 600 in-lbs 300 lbs. 286:1 3.1 9 5⁄8" DTN1LPP7 * 12 600 in-lbs 300 lbs. 144:1 3.3 9 5⁄8" DTN1LPP6 * 18 550 in-lbs 300 lbs. 97:1 3.6 9 5⁄8" DTN1LPP5 * 30 400 in-lbs 190 lbs. 57:1 3.9 9 5⁄8" DTN1LPP4 40 330 in-lbs 190 lbs. 43:1 4.1 9 5⁄8" DTN1LPP3 60 200 in-lbs 190 lbs. 29:1 3.9 9 5⁄8" DTN1LPP2 90 150 in-lbs 150 lbs. 19:1 4.1 9 5⁄8" DTN1LPP1 120 100 in-lbs 110 lbs. 14:1 3.9 9 5⁄8" DTN1LPN9

B

31 800 in-lbs 400 lbs. 56:1 8.3 10" WWG1LPU5 62 400 in-lbs 400 lbs. 28:1 8.30 10" WWG1LPU4 92 287 in-lbs 400 lbs. 19:1 8.30 10" WWG1LPU3

DAYTON

AC Parallel-Shaft Gearmotors

▪Gearcase: zinc die cast with steel cover ▪Lubrication: grease filled ▪Gears: sintered steel and phenolic ▪Bearings: porous bronze sleeve

on both case and motor ▪Mounting: all positions on models with

magnetic brake, output shaft horizontal only on models with cone brake ▪Rotation: CW facing output shaft ▪Thermal protection: yes ▪CSA certified

Nameplate RPM Torque (in-lbs) Start Torque (in-lbs) Run Overhung Load Input HP Gear Ratio Full Load Amps Length (in.)

Item

No. Shaded Pole 115 V, 60 Hz, Magnetic Brake

50 5.5 6.5 3.5 lbs. 1/70 65.6:1 0.75 3 3⁄4 DMDHGM4050-33 Shaded Pole 115 V, 60 Hz, Cone Brake

26 11.0 13.0 3.5 lbs. 1/70 125:1 0.75 A 3 7⁄8 DMDHGM4026-51

DAYTON

* Output torque is gear limited.

B. B.

A.

A.

DMDHGM4050-33