AMC 2026 catalogue

Material Handling

Find even MORE at Grainger.ca 703

1-888-602-0000 MATERIAL HANDLING

Strapping Accessories

Safety Strap Cutters Strap Ga. .047" and General- Duty .050" Cutters— Cut tight steel straps with one hand and feature ergonomic handles to provide comfortable cuts. .050" Cutters have cushion grip, which is easy on the muscles.

Strap Ga. .035" Cutter—Jaw sits low to sneak under high-ten- sion straps.

HKP0990T

Strap Gauge Strap Width Tool Length

Item

No. Heavy-Duty

0.050" 2" 24" HKP2690GP General-Duty

0.035" 3⁄4" 9" HKP0990T 0.050" 1 1⁄4" 12" HKP1290G

CRESCENT H.K. PORTER

Steel Strapping Seals

▪Painted steel

Push-Type Seals for Round Surfaces—Used where steel strapping is tensioned by butting the nose of the tensioner against the seal.

Open (snap on) Seals for Flat Surfaces—Seals are placed over the overlapping strap ends during or after tensioning the strapping; no prethreading.

SIG000553

SIGAG2X1100

Joint Type Seal Type Brand

Item

No. Pkg. Qty. Single Reverse

Notch

Push Signode SIG000553 1 Push Signode SIGAG000572 4000 Single, Double

Notch Open — WWG52YU57 200

Double Notch Snap-On Signode SIGAG2X1098 200 Snap-On Signode SIGAG2X1100 200

APPROVED VENDOR, SIGNODE

Steel Feedwheel Strapping Tensioner Provide maximum tensioning for secure bundles. Serrated feedwheel engages strapping firmly to remove any slack. Signode is designed for at least 6" flat working surface on which to set the tool.

SIG003450

For Strapping Width For Strapping Thickness

Item

No. 5⁄8" - 3⁄4" 0.017" - 0.025" SIG003450 3⁄8" - 3⁄4" 0.015" - 0.023" WWG3CUN7 3⁄8" - 3⁄4" 0.018" - 0.025" WWG49H258

APPROVED VENDOR, ENCORE, SIGNODE

Steel Strapping Sealers Create a strong, secure seal by notching seals into tensioned strapping. Outer edges of strapping and seals are notched by turning tabs down (Regular) or up (Reverse). Designed for either flat or round surfaces. Steel construction.

For Strapping Width

For Strapping

Thickness Notch Type

Item

No. 3⁄4" Up to 0.023" Double Notch SIG008615

SIGNODE

Pneumatic Steel Strapping Tools

▪For flat surfaces

Tensioner—Allows uniform and precise tensioning and sealing by adjusting air pressure. Quick- disconnect plug and socket are included. Filter-regulatorlubricator is required. Up to 700 lb. of tension. Max. strap gauge is 0.044".

Sealers—Create a secure seal by notching seal into tensioned strap. Max. strap gauge is 0.031".

SIG423500

SIG424200

For Strapping Width

For Strapping

Thickness Notch Type

Item

No. Tensioner

3⁄4" - 1 1⁄4" Up to 0.044" — SIG423500 Sealers

1 1⁄4" 0.025" - 0.031" Single Reverse SIG424125 3⁄4" 0.025" - 0.031" Single Reverse SIG424200

SIGNODE

Steel Strapping Combination Sealless Tools

▪For flat surfaces Tension, crimp, and cut strapping with just 1 tool. Tensions 2 ends of strapping, then interlocks and crimps them to create a seal. Can be used for retensioning loose straps.

For Strapping

Width

For Strapping

Thickness Style Brand

Item

No. 1⁄2" 0.017" - 0.023" Front Action Approved Vendor WWG52YU73 5⁄8" Up to 0.023" Sealless Signode SIG424358

APPROVED VENDOR, SIGNODE

Front Action Sealers— Positioned perpendicular to the strapping for use in front of the operator. For light to medium tensile strength strapping.

HKP2690GP

SIG424358