AMC 2026 catalogue

Hardware

Hinges

Need a price? Log in or register at Grainger.ca 1186

HARDWARE

Hospital Tip Hinges

▪270º range of motion ▪Hardware included ▪Square corners Recommended for use on high frequency and/or heavy wood or metal doors in schools, hospitals or other public buildings where security requirements exist. Feature four holes per leaf and a thickness of 0.190". The swing clear is 180°. WWG52AU17 WWG33MJ74 WWG25HE02 GGH4PA53

Height Width Material Finish Ligature Resistant Door Leaf Thickness Bearing Type Brand

Item

No. Swing Clear

4 1⁄2" — Steel Dull Chrome Yes 0.190" Sleeve Mckinney WWG25HE18 Full Mortise

4 1⁄2" 4 1⁄2" Stainless Steel Dull Stainless Steel No 0.134" Ball Mckinney WWG52AU17 4 1⁄2" 4 1⁄2" Stainless Steel Dull Stainless Steel No 0.180" Ball Mckinney WWG52AU19 4 1⁄2" 4 1⁄2" Stainless Steel Dull Stainless Steel No 0.180" Ball Mckinney WWG52AU20 4 1⁄2" 4 1⁄2" Stainless Steel Dull Stainless Steel No 0.180" Sleeve Mckinney WWG25HE02 4 1⁄2" 4 1⁄2" Stainless Steel Dull Stainless Steel Yes 0.180" Sleeve Mckinney WWG25HE17 4 1⁄2" 4 1⁄2" Steel Dull Chrome No 0.134" Sleeve Mckinney WWG25HE04 4 1⁄2" 4 1⁄2" Steel Satin Chrome No 0.180" Ball Ives WWG33MJ74 4 1⁄2" 4 1⁄2" Steel Dull Chrome No 0.190" Sleeve Mckinney WWG25HE14 5" 4 1⁄2" Stainless Steel Dull Stainless Steel Yes 0.190" Ball Mckinney WWG25HE11 5" 4 1⁄2" Stainless Steel Dull Stainless Steel No 0.190" Ball Mckinney WWG52AU23 5" 4 1⁄2" Steel Dull Chrome Yes 0.190" Ball Mckinney WWG25HE10 5" 4 1⁄2" Steel Dull Chrome Yes 0.190" Ball Mckinney WWG25HE12

IVES, MCKINNEY

WWG4AZV3 WWG25HE30 GGH1VZU5

Pivot Hinges

Create less stress on the frame assembly, prevent door sagging, and allow the door to swing with less resistance. Fasteners on the door and frame are in shear rather than tension, and are less likely to pull out over time. Hardware included.

Range of Motion Mounting Door Thickness Load Capacity Holes per Leaf Orientation Brand

Item

No. Pkg. Qty. 180° Full Mortise 1 3⁄4" 250 lbs. 5 Left Hand Rixson WWG4AZU8 1 180° Full Mortise 1 3⁄4" 600 lbs. 4 Right Hand Rixson WWG4AZU1 1 180° Full Mortise 1 3⁄4" 600 lbs. 4 Left Hand Rixson WWG4AZU2 1 180° Full Mortised 1 3⁄4" 250 lbs. 4 Center Hung Rixson WWG4AZV3 1 180° Full Surface 1 3⁄8" to 1 3⁄4" 150 lbs. 2 and 3 Center Hung STANLEY WWG5MRE6 2 180° Full Surface 1 3⁄8" — 4 Right Handed Approved Vendor GGH1VZU5 1 180° Offset 1 3⁄4" 300 lbs. 4 Non Handed Markar WWG25HE30 1

APPROVED VENDOR, MARKAR, RIXSON, STANLEY

GGH1JEY8

Unfinished Steel Hinges with Steel Pins, No Holes Hinges can be surface mounted by drilling holes and using fasteners, or spot welded. Can be cut using a hacksaw. 270° range of motion. Additional sizes available on Grainger.ca

Overall Width Pin Dia. Overall Knuckle Height Brand

1-FT. LENGTH

8-FT. LENGTH

4-FT. LENGTH

6-FT. LENGTH

2-FT. LENGTH

5-FT. LENGTH Item

No.

Item

No.

Item

No.

Item

No.

Item

No.

Item

No. 0.060 in Leaf Thickness 2" 1⁄8" 1⁄2" Approved Vendor — — — GGH4PB35 — — 0.090 in Leaf Thickness 3" 1⁄4" 1" Approved Vendor — — — — — GGH2ZER1 0.120 in Leaf Thickness 2" 1⁄4" 2" Approved Vendor — — GGH2ZET9 GGH2ZEU2 — — 3" 3⁄8" 2" Approved Vendor — GGH2ZEV9 GGH1JEY8 — — — 4" 3⁄8" 2" Approved Vendor — GGH2ZEW9 GGH1JEZ1 GGH2ZEW8 — — 0.180 in Leaf Thickness 3" 1⁄2" 2" Approved Vendor — GGH1JFL7 GGH1JFL6 GGH2ZEX7 GGH2ZEX6 — 4" 1⁄2" 2" Approved Vendor — GGH2ZEY3 GGH2ZEY1 GGH2ZEY2 — — 0.250 in Leaf Thickness 3" 5⁄8" 2" Marlboro GGH4PND3 — — — — —

APPROVED VENDOR, MARLBORO